Froggy__007 escribió:Alguien sabe donde descargarlo me e recorrido todo xbins y no lo encuentro.
San Google es tu solución.
Yo todavía no he aplicado el parche, todavía no estoy seguro de los pasos.
Según los readme que vienen en el archivo, en la carpeta
freeboot xbr patchbuilder v2.
Add your code to "patches.S"
double click on "build_patch.bat"
** NOTE **
the batch file contains commands to automatically apply the patch to a "hack.bin" nand
image using Tiros' excellent nandpro v2b, just add your hack.bin (can be any or all of them)
to the same folder as the batch file and name it the same as your console/flashed revision
valid names for freeboot files:
hack_falcon.bin
hack_jasper.bin
hack_xenon.bin
hack_zephyr.bin
valid names for XBR files:
hack_xbrBB.bin
hack_xbrSB.bin
* hack_xbrSB can be any of the 16M XBR v3* versions
* hack_xbrBB is for the 64M (for 256/512M NAND) version
-revisions-
v1 : initial batch file to build for freeboot
v1b: fix for msys version of cat altering bytes of the binary data
v2 : adds xbr bases and xbr targets for nandpro
: default freeboot patches for unsigned xex etc are now integrated into freeboot base files
: added in more dlls it could ask for on systems that don't have msys, dlportio or libusb installed
** thanks **
Thanks to Tiros (nandpro),
everyone behind the jtag hack that has enthralled me for months,
cocker80 (for supplying prebuilt as and objdump bins),
whomever came up with portio (as nandpro won't run without the dll even when it doesn't use it.)
cz
Yo he renombrado mi nand de mi xenon ya parteada con XBR3 a
hack_xbrSB.bin (Depende del tipo de placa y si es para XBR o Freeboot) y lo he copiado a la carpeta donde he ejecutado el archivo
build_patch.batEl cual genera varios archivos en la carpeta out, el que me interesa es el
xbrSB.bin.
Creo que este archivo hay que parchearlo con el xell o con el Flash360, renombrandolo a
updpatch.bin.
El readme del flash360.
Flash360 v1.0 By Redline99
2010-01-15
Place in the root dir of a usb drive:
updslot0.bin - Xell (Address 0x0C0000 max length 0x040000 bytes, no metadata)
updslot1.bin - Rebooter (Address 0x100000 max length 0x140000 bytes, no metadata)
updpatch.bin - Rebooter Patches (Address 0x194000 max length 0x004000 bytes, no metadata)
updflash.bin - Nand Image File (this must include the metadata or aka spare/ecc bytes)
Must be the full nand with exceptions for consoles with a built in Memory Unit.
Flash360 will scan the bad block reservation area of the file to be flashed.
If it finds blocks that have been remapped then it sets the writing mode
to write the file as-is. If it determines that no blocks have been remapped
then it sets its write mode to relocate any blocks as it goes along.
The block relocator logic will only apply to the Flash partition. This means that it
will not try to relocate any block from the built in Memory Unit (if available).
A simple check of the KV will be done if the choice to not copy it from the current
nand is selected. Flash360 cannot currently get the CPU key to completely verify
the KV before writing. If it detects a difference in the first page it will
warn you before proceeding.
If Flash360 is ran from a HDD, USB or MU, saving the current nand image will be available.
The raw dumped nand file will be saved to "D:\flashdmp.bin". (same dir as xex)
For consoles with built in MU:
You can select to save the entire nand or only the Flash partition (66 MiB).
This also means you can write just Flash partition (66 MiB) to the nand.
When writing the Flash you can select to keep the current Keyvault and Config blocks.
This is the recommended way to flash XBRebooter, straight from the release package.
If any writing to the nand is done do not return to the dash or bring up the guide.
An auto shutdown mechanism is in place by backing out of the main menu.
The power plug should be removed to allow for a complete reinitialization of console.
Notes:
It is up to the user to verify the validity of the file(s) to be flashed.
Flashing the nand is risky, I hope it works well for everyone, if problems arise
I will do my best to address them. There are still many items I would like
to do/add to this app, so it will be a work in progress.
When using this app do not do anything that will interrupt it. Do not use the
big center guide button on the controller. Do not have the dash doing anything in
the background. Remember what this application is doing is replacing the contents on
the nand without the rest of the system knowing about it.
There is also a new Xell I have created with many of these features plus some new
ones that should be nice. Time didnt permit releasing it though.
Thanks:
To kreet and angerwound for looking over my code and fixing many noob mistakes. :)
And especially to all the gracious people who helped test!
Greets:
r0wdy, tiros, MODFREAKz, schtrom, xorloser, tmbinc, seventhson, angerwound, kreet, lantus,
Skorchir, D-BlooD, momdad, skitzo, Cr4zi3, Sonic-Iso, stk50, Yoshihiro, Arakon and Alley.
Team Greets:
XBRebooter, XeDev, Jungle, HyperX, Avalaunch, Xecuter,
MS Interactive Entertainment Business Department
Pero ya digo que yo todavía no lo he probado, espero que se confirme el proceso.
Saludos.
, aparte de que si se pone en USB y no esta conectado como es logico no arrancaria.![[oki]](/images/smilies/net_thumbsup.gif "Ok!")
![[beer]](/images/smilies/nuevos2/brindando.gif "brindis")
![[Ooooo]](/images/smilies/nuevos/sorprendido_ani1.gif "Oooooo")
![[enfado1]](/images/smilies/nuevos/enfado_ani1.gif "enfadado")
(o eso he leído, ya que tp lo he probado 
?? ![[toctoc]](/images/smilies/nuevos2/rompiendo.gif "machacando")
