Esto seguro que interesa a muchos:
Debug Console Commands To access the debug console, do the following: In Steam, right click on The Evil Within and select “properties” then under the General tab, hit “set launch options.”
Put this in to unlock the console: +com_allowconsole 1
Once the game has launched, hit the Insert key to bring down the developer console.
These are the commands you can use and some notes about each: R_swapinterval <NUMBER>
Sets the FPS lock. Note that the numbers below are negative.
-2: This is the default, set to 30 FPS. This is the officially supported frame rate
-1: This sets the FPS limit to 60. Fully playable, although there may be quirks (we’re going to fix these).
0: This fully unlocks the FPS. We do not recommend playing above 60. We will not fix any issues above 60.
God God mode. You are effectively invincible, and certain enemy kill moves will not be used against you (Laura, for example, will not jump on you)
Noclip Allows you to walk through walls
G_infiniteammo Unlimited ammo (provided you have at least 1 bullet when you enable this)
G_stoptime 1 Stops time. Note there is a bug right now where using this command causes a UI element to appear on screen. We’re looking to fix that in the near future.
Re enable time with g_stoptime 0
Toggledebugcamera Separates the camera from Sebastian so you can freely move around the
R_forceaspectratio <NUMBER> Sets the aspect ratio. Default is 2.5, which is our official aspect ratio.
0 is full screen, but not ideal. 1.8 or 2 is probably most comfortable for those who don’t want bars.
Com_showFPS Turns on id’s native FPS counter
Startslowmotion2 Slows down time
Stopslowmotion Disables slow motion
http://forums.bethsoft.com/topic/1508646-debug-console-commands/salu2