y si comentais como va esto y que tal funciona genial, que estoy más liado que la pata de un romano. karlos007 escribió:a ver si alguien lo prueba y nos dice si funciona, aparte a ver si funciona el FSD2.0a y esas cosas
![[carcajad]](/images/smilies/nuevos/risa_ani2.gif "carcajada")
Suelo esperar a que alguna alma caritativa lo suba a megaupload. ).
![[uzi]](/images/smilies/nuevos2/uzi.gif "uzi")
![[beer]](/images/smilies/nuevos2/brindando.gif "brindis")
![[sati]](/images/smilies/nuevos2/demonio.gif "demoniaco")
xixarra escribió:¡Alabados sean los Sceners! Ya tenemos el nuevo dash, xDDDD. Con las ganas que le tenía. De momento me esperaré a que algún alma caritativa haga un Tuto, y empezaré a destripar
Bueno, el complemento perfecto sería el FSD. Pero bueno, esto es aún un sueño húmedo, jajajaja.
Saludos!!!!
DazMalaga escribió:kaotico0001 escribió:Alguien sabe el proceso para realizar y no liarnos tanto
+1
A la espera estamos.
Mantix escribió:ya salio el nuevo dash launch!!!
* At time of this writing, this is ONLY compatible with "freeBOOT" 12611 read info_launch.ini for info on options and setting launch parameters.
* This a core rewrite, major changes were done to the paths used in the ini file, the installer can update these for you if you have the old ini files accessible at the time of install. See the inlcuded sample ini files.
* The installer is now much more robust, and can even flash the appropriate patches to your console for you, all that is required is that you have installed freeboot 12611
Overview - what it does
- It will launch a XeX or CON file from the path you specified in launch.ini as long as it's valid
- Depending on the button you hold when the xbox is trying to load the NXE, it will divert to the xex/con tied to that button or return to default as defined in launch.ini
- Depending which button is held when closing miniblade in NXE (use Y button to close, release then hold a QL button) it will quick launch a CON or XEX from your ini file
- allows one to patch kernel/xam at bootup with a freeBOOT patch style bin file from usb or hdd (in that order) must be in root of the device and be named "kxam.patch" and be no larger than 0x4000 bytes. Again, kxam.patch binary format is the same as a compiled freeboot patch bin, but uses real virtual addresses rather than offsets - see 1.0 release for a windows patch builder
- with the included patch set, launch.xex acts as a helper to detect when xbox1 emulator loads, allowing memory unlock patch and xbox1 emulator to function together
What's new/fixed:
* updated for 12611
Dash Launch 2.03
----------------
****
at time of this writing, this is ONLY compatible with "freeBOOT" 12611
read info_launch.ini for info on options and setting launch parameters.
****
This a core rewrite, major changes were done to the paths used in the ini
file, the installer can update these for you if you have the old ini files
accessible at the time of install. See the inlcuded sample ini files.
The installer is now much more robust, and can even flash the appropriate
patches to your console for you, all that is required is that you have
installed freeboot 12611
****
================================================================================
Overview - what it does
================================================================================
- It will launch a XeX or CON file from the path you specified in launch.ini
as long as it's valid
- Depending on the button you hold when the xbox is trying to load the NXE, it
will divert to the xex/con tied to that button or return to default as
defined in launch.ini
- Depending which button is held when closing miniblade in NXE (use Y button to
close, release then hold a QL button) it will quick launch a CON or XEX
from your ini file
- allows one to patch kernel/xam at bootup with a freeBOOT patch style bin file
from usb or hdd (in that order) must be in root of the device and be named
"kxam.patch" and be no larger than 0x4000 bytes. Again, kxam.patch binary
format is the same as a compiled freeboot patch bin, but uses real virtual
addresses rather than offsets - see 1.0 release for a windows patch builder
- with the included patch set, launch.xex acts as a helper to detect when
xbox1 emulator loads, allowing memory unlock patch and xbox1 emulator
to function together
================================================================================
Installation
================================================================================
- have the required freeboot version installed on the console
- get the installer to a place where you can run it, and do so. Follow onscreen
instructions. The installer will prompt you if it needs to update the
freeboot patches and will give you an opportunity to configure the new
options
- edit and place launch.ini where you would like it
**See inlcuded sample and the info ini which describes the options allowed**
note: the installer includes upgrade paths for dash launch 1.0 users, it will
optionally update launch.ini files wherever found to use the new path names
when upgrading an existing flash ini file, the installer will fix the paths
as needed and write it back to the installer's files directory to be written
to flash, if you have provided an ini file for flash installation be sure to
say no to the upgrade prompt for an existing flash ini file
================================================================================
Important - going to NXE
================================================================================
- if you need to go back to NXE and have default item set in ini, HOLD RB while
exiting game via miniblade or exit using one of the miniblade options like
family settings or system settings
================================================================================
INI notes
================================================================================
-it's possible to have multiple ini files, priority is: USB, HDD, BB MU, FLASH
(** it is NOT recommended to launch USB con/xex from hdd ini **)
-see http://code.jellycan.com/simpleini/ for more info on the ini parser
================================================================================
Caveats
================================================================================
The work herein is presented as-is, any risk is solely the end users
responsibility. While all of us are sorry when unforseen things happen, not
every situation or mistake can be accounted for before they have been
spotted. Please use responsibly.
================================================================================
Thanks
================================================================================
-Big thanks to those who opened the way and those who made it even more usable.
-Thanks to Tux, Arbiter, stk, the2000 and Corrupted for all the bugs you caught
trying to sneak by!
-Thanks to Tux, Ironman, JPizzle and Dionis Fernandez for helping procure a
Jasper big block console to extend testing and fix NAND MU corruption bug
Dionis - you went above and beyond!
-Thanks to vgcrepairs for providing the cygnos, dash launch likely wouldn't
exist without one.
-Thanks to FBDev and mojobojo for the data used for the patch options
-Thanks to sm32
-Thanks to unknown, you know why
-Greetz to XeDev
~brought to you by cOz~
??/??/2010
================================================================================
Known Bugs
================================================================================
- Thanks to excellent testers, none were corned by the time of this writing. If
you find any during use, find the release thread at xbox-scene and please
report them there.
================================================================================
ChangeLog
================================================================================
v2.03
- updated for 12611
v2.02
- added version info to data struct exported at ordinal 1
- made number of times button holds are scanned variable, longer window
at boot time to sync controller and hold a button
- added region spoofing for XGetGameRegion
- DVD video play from NXE now plays DVD regardless of default setting
(thanks krizalid!)
v2.01
- corrected flash mu mount point (thanks Antho02 at l-s)
- added kernel version check to installer as some xbr using folks seem incapable
of reading the first line of this file
v2.0
- plugins now use logical paths just like quick launch buttons
- added common (9199) content and ping limit patches as options
- mostly runs in system threads, startup completes while bootanim runs
- completely subverted dash.xex, no more CD issues or NXE split seconds
- removed insistance on 0/1/2 paths and reliance on CaPs to detect
- return to NXE via miniblade for system settings and others works w/o using RB
- added big block NAND mu as possible device
- optionally subvert Y to exit miniblade while in NXE to load button/default
- added xell loader to patch set and included a xex to load xell
- removed reboot on fatal error from patches
- included reboot/shutdown on fatal error as settings
- installer onscreen output cleaned up, now shuts down console at end of install
- added ini file updater to installer
- added patch updater to installer
v1.0
- added other devices for launch targets
- added flash for location to load launch.ini
- added flash installer supports flashing launch.xex and launch.ini
- with help of freeboot patches, fixes issues with xbox1 emulator on memory
unlocked patchset
- overhaul ini parser with simpleIni, support for most buttons and a default
- added dll/plugin loading support
- added hooking/return to launch app instead of NXE (hold RB to bypass)
- added kernel/xam boot time/one time patch engine
- added export to allow the loading of other system modules
v0.02
- added a small delay to allow XBR users to launch CON
- implemented a simple ini file parser and fileExist
- auto detects LIVE and XEX2 to use the appropriate launch method
- fails to dash reliably now
v0.01
-initial release
![[tomaaa]](/images/smilies/nuevos2/tomaa.gif "toma")
manuelin94 escribió:DazMalaga escribió:kaotico0001 escribió:Alguien sabe el proceso para realizar y no liarnos tanto
+1
A la espera estamos.
yo estoy haciendo un tutorial para "tontos"
cuando lo acabe lo posteo
salu2
