Construir Cable Usb Para Cargar Nitendo Ds!!!

Chavito2 escribió:Jajja como la PSP tiene una beteria Pollua con bastantes miliamperios( pq gastar gasta pilas...) ya tenemos la solucion a la portabilidad y autonomia de la DS, no comprar baterias!! comprarnos una PSP

Ya me veo las noticias de meristation... IGn Gamestop

Cifra de ventas de PSP 1000000
Cifra de ventas de DS 1000000
Ratio de Juegos de PSP 0:0
Ratio de juegos de DS 5:1
Explicacion Psp Cargador de baterias para DS

La verdad es q es una ironia como dice dreamer

DreamerXL escribió:
Pa que habré dicho nada...

I start off with a basic power adapter, and an extra USB cable I had laying around.
Then I used my wire cutters to snip off the ends of the two cables.
Now I stripped off the outer shielding for the USB cable.
USB has 4 wires. +5v, Ground, Data+, and Data-. The only wires I am concerned with are the power. Red is +5v, black is ground. I strip these two wires for preperation.
One DS power adapter side of things, I stripped it down, and found two wires, one on the inside of the green housing, and one on the out. Generally speeking, when this is done, the inside is the power, and the outside is ground. I whipped out my voltage meter to verify this, and sure enough, my theory was correct.
I then move on to stripping the wire that will be attached to the DS unit.
In the bottom left corner, you can see the wires twisted together. USB red connects to DS inside green, and USB black connects to DS outside.
I then finish up the job with some blue electricle tape, and test it out by pluging it into my keyboard's aditional USB port. The orange light on the DS lights up! SUCCESS!