DIY X-Clamp Fix Kit - Metodo definitivo para las 3LR ?

What parts are included in the X-Clamp-Fix and what makes the difference here from other non commercial kits ?

1. 4 pieces of low Lens Head Stainless Steel Machine Screws 5mm x 10mm with a low heigth Lens Head. If you follow the direction from other X-Clamp Tutorials you have to drill bigger holes because of using standard Machine Screws with big head. The screws we use in our kit matching exactly the room between the mainboard and the metal housing. We never get those Screws in a local Home Improvement Store here. We have to buy them at industrial supplies in big quantities.

2. 4 pieces of Spring washers made of Spring Steel 5mm. These special washers keeps the pressure high on the hole connection between the mainboard and the metal housing. These special Spring washers avoids that the screws become loose in time. In other tutorials simple flat washers are used. That means that getting the 3RROD again is just a matter of time.

3. 4 pieces of Distance Washers made of Nylon 1mm thick. These isolating distance washer are made of hard and hot resistance Nylon. Nylon is near as hard as steel and additional it keeps away short circuits as the`re placed on top of the mainboard and we can`t use metal hear. Why do we choose Nylon ? Because of it`s hardness and wear lifespan. In our first experiments we use the plain plastik washers used in the other tutorials and we recognized that they`re shrinking very quickly when we turn in the screws Tightly. When we measure the washers they shrinked from 1mm to 0.5mm and that was the point when we kicked them out of the kit. The distance between the Heat Sink and the mainboard is very important as it produces exactly the pressure we need. Not to low and not to high. These Nylon washers were not available in any Home Improvement Store here. We have to buy them at industrial supplies in big quantity. You see no difference if you have plain plastic or Nylon. But you can test it. Just try to shrink them with a flat plier.

4. 4 pieces of Stainless Steel Washers 1mm thick. These washers lay on top of the Nylon Washer so you have a whole distance of exact 2mm.This is the world`s first Do-it-yourself X-Clamp-Fix Kit available. With this Kit you`re able to fix the 3 Red-Ring-of-Death Issue on XBOX 360 FOREVER. The Idea came from some Hackers in the Console Scene and is enhanced to perfect by a german Engineer. All the Content in this special Kit is completely made in Germany ! Here`re some explanations.

Bogard escribió:Pues yo no encuentro esta medida de tornillo

M 5,8 x 10

incluso ferreteros me dicen que no existen....
Ando desesperado la verdad porque solo encuentro
5,5 x 10 ó 6 x 10

y no me voy a arriesgar a ver si sirven, que no me gusta estar abriendo la consola para nada...

si ahora en septiembre , que habren un par de ferreterias (por el tema de las vacacciones), esta web es la unica y cara opcion... ; (
por si acaso la guardo en mis favoritos...

Los tornillos son m5 medidas 0,8x10