Loren_Son escribió:Hola!!
Empezando en esto de RGH.
Ante todo, disculparme si repito pregunta, pero he leido como 50 tutoriales y no me aclaro.
No soy un usuario nuevo, creo que mi trayectoria en el foro lo ratifica.
Al lio:
Xbox360 slim, actualizada a 13604 antes de hacer nada.
Instalado Glitchip (tiempo de carga 25 seg)
He instalado XexMenu 1.1, FSD 2.0 v 2.1, Dashlaunch 2.25... todo ello a base de leer.
He visto que hay problemas con los avatares "avatares gris o negro". La duda que tengo, es que cada vez que enciendo la maquina me sale un avatar gris y el mensaje de que se ha detectado un perfil, y tengo que entrar a seleccionarlo. No se si esto es asi (antes salia el "por defecto") o si tengo el problema de los avatares.
Por si acaso, he intentado las dos opciones que he leido para solucionarlo.
1.- Copiar la actualizacion a un pendrive y renombrar a "$$systemupdate" => que no ha funcionado
2.- Modificar "launch.ini" con XXX = false (perdonar pero no recuerdo que va donde las XXX, estoy saturado) => que no ha funcionado.
la maquina no se entera de que hay una actualizacion en el pen.
Tambien he intentado con "2.0.12611.0 by manuelin" => que tampoco ha funcionado (por lo de los efuses, creo).
¿TENGO EL PROBLEMA DE LOS AVATARES O ESTA PERFECTAMENTE LA MAQUINA Y HAY QUE SELECCIONAR SIEMPRE EL PERFIL?
Otra duda que tengo es debido a Kinect. En unos dias llegara a mi poder, y por lo que he leido la primera vez que lo conecte me pedira actualizar, cosa que creo que puedo hacer sin riesgo de que pase nada. ¿ES ASI?
Y por ultimo, para no hacerme "el protagonista del foro" xD me gustaria saber si hay forma de proteger los efuses, o de impedir que salten las actualizaciones en caso de introducir y juego que lleve una superior?
Un saludo
Viral Doom escribió:
que tal si intentas: "$$ystemupdate"
GamerGDL escribió:Que tal, si los avatares se muestran correctamente cuando seleccionas tu perfil, todo funciona OK.
Realmente es una preguntada "noob" pero bueno, a todos nos pasa alguna vez. Ve a configuracion de consola (en el NXE) y busca inicio automatico o algo asi, ahi esta la opcion para que el perfil se seleccione autaticamente al encenderla.
Por otro lado, mientras la actualizacion no cambie de version pueden meterle la que quieras ya sea para agregar los avatares o el kinect.
Las actualizaciones las puedes bloquear desde el launch.ini solo busca esta linea "noupdater" y ponla en "true".
EDITO: No es configuracion de consola, es en perfil, preferencias de inicio automatico.
kafwell escribió:Buen, aprovecho este hilo para preguntar, pero antes expongo mi problema y lo que he hecho:
- Tengo una consola con el RGH hech, funcionando todo ok salvo los avatares grises.
Y ahora lo que he hecho:
- En la versión de dash me sale la última, la 13604
- He probado metiendo un USB con el update oficial sacado de la web de microsoft, previamente descomprimido (te descomprime una carpeta llamada "$systemupdate")
- He probado tal cual en la consola, y no me detectaba la actualización.
- He probado a encender la consola con el USB puesto y nada (en todos los puertos USB de la 360)
- He cambiado el nombre de la carpeta a "$$systemupdate" y tampoco me salta la actualización
- He probado usando el updatespy, pero me descarga los mismo ficheros salvo un default.xex
- Aun así lo he probado (con y sin default.exe), y nada.
Hay alguna forma de meter el update manualmente (con el xport360 o algo así)?
Si ejecuto el default.xex que aparecía en el archivo de updatespy, pasa algo?
EDITO: El usb está en FAT32
EDITO 2: también he añadido una línea al launch.ini de "noupdater = false"
Viral Doom escribió:
que tal si intentas: "$$ystemupdate"
Loren_Son escribió:Llego kinect y con ello los problemas!!
Cuando empiezo el manual de configuración cuando va a hacer la prueba de sonido me dice que no detecta el microfono. Tambien me ha empezado a fallar el mando, el boton central, la x entre select y start no hace nada, solo encender el mando, vamos que no entra al menu.
No se si me habre cargado algun archivo del disco. Toca reescribir la nand al no ser que alguien me diga lo contrario
; launch.xex V2.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; internal slim 4G mu IntMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; example entry
; Default = Hdd:\FreeStyle\default.xex
[QuickLaunchButtons]
BUT_A = Hdd:\Apps\Freestyle\default.xex
BUT_B = Hdd:\Apps\XeXMenu\default.xex
BUT_X = Hdd:\Apps\xm360\XM360.xex
BUT_Y = Hdd:\Apps\XellLaunch\default.xex
Start =
Back =
LBump =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = Hdd:\Apps\Freestyle\default.xex
; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console, this item will be used instead of default
Power =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 = Hdd:\Plugins\ftpdll.xex
plugin2 =
plugin3 =
plugin4 =
plugin5 =
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = false
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot (hard reboot), setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; when fatalfreeze is set to false and fatalreboot is set to true, setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
safereboot = false
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7FFF
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
dumpfile =
; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
; and thus extends the length of time the boot animation will be displayed onscreen
; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
; if set too long other wonky things happen
; note this value is interpreted as hexidecimal when preceded with 0x, valid range is 0 to 0xFFFFFFFF
; if not set this value will be put to 0x2A (42)
bootdelay = 0x2A
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false
; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false
; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
hddalive = false
; in seconds, the interval between when USB devices will be polled for "alive.txt" file
hddtimer = 210
; all comments and fields in this file are optional, you can remove anything you don't need - section headers []
; are required for any used options under the section
; sorry for any double negatives :p
; njoy, cOz
Viral Doom escribió:Loren_Son escribió:Llego kinect y con ello los problemas!!
Cuando empiezo el manual de configuración cuando va a hacer la prueba de sonido me dice que no detecta el microfono. Tambien me ha empezado a fallar el mando, el boton central, la x entre select y start no hace nada, solo encender el mando, vamos que no entra al menu.
No se si me habre cargado algun archivo del disco. Toca reescribir la nand al no ser que alguien me diga lo contrario
Es una opción en el launch.ini xD
No entiendo por que tocan el launch.ini, puede ser cuando lo instalan y no saben lo que modifican desde los promp de instalación en el xbox??
Dejo mi launch.ini con los quote que vienen con el, para que lean; launch.xex V2.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; internal slim 4G mu IntMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; example entry
; Default = Hdd:\FreeStyle\default.xex
[QuickLaunchButtons]
BUT_A = Hdd:\Apps\Freestyle\default.xex
BUT_B = Hdd:\Apps\XeXMenu\default.xex
BUT_X = Hdd:\Apps\xm360\XM360.xex
BUT_Y = Hdd:\Apps\XellLaunch\default.xex
Start =
Back =
LBump =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = Hdd:\Apps\Freestyle\default.xex
; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console, this item will be used instead of default
Power =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 = Hdd:\Plugins\ftpdll.xex
plugin2 =
plugin3 =
plugin4 =
plugin5 =
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = false
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot (hard reboot), setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; when fatalfreeze is set to false and fatalreboot is set to true, setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
safereboot = false
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7FFF
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
dumpfile =
; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
; and thus extends the length of time the boot animation will be displayed onscreen
; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
; if set too long other wonky things happen
; note this value is interpreted as hexidecimal when preceded with 0x, valid range is 0 to 0xFFFFFFFF
; if not set this value will be put to 0x2A (42)
bootdelay = 0x2A
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false
; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false
; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
hddalive = false
; in seconds, the interval between when USB devices will be polled for "alive.txt" file
hddtimer = 210
; all comments and fields in this file are optional, you can remove anything you don't need - section headers []
; are required for any used options under the section
; sorry for any double negatives :p
; njoy, cOz
Loren_Son escribió:Viral Doom escribió:Loren_Son escribió:Llego kinect y con ello los problemas!!
Cuando empiezo el manual de configuración cuando va a hacer la prueba de sonido me dice que no detecta el microfono. Tambien me ha empezado a fallar el mando, el boton central, la x entre select y start no hace nada, solo encender el mando, vamos que no entra al menu.
No se si me habre cargado algun archivo del disco. Toca reescribir la nand al no ser que alguien me diga lo contrario
Es una opción en el launch.ini xD
No entiendo por que tocan el launch.ini, puede ser cuando lo instalan y no saben lo que modifican desde los promp de instalación en el xbox??
Dejo mi launch.ini con los quote que vienen con el, para que lean; launch.xex V2.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; internal slim 4G mu IntMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; example entry
; Default = Hdd:\FreeStyle\default.xex
[QuickLaunchButtons]
BUT_A = Hdd:\Apps\Freestyle\default.xex
BUT_B = Hdd:\Apps\XeXMenu\default.xex
BUT_X = Hdd:\Apps\xm360\XM360.xex
BUT_Y = Hdd:\Apps\XellLaunch\default.xex
Start =
Back =
LBump =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = Hdd:\Apps\Freestyle\default.xex
; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console, this item will be used instead of default
Power =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 = Hdd:\Plugins\ftpdll.xex
plugin2 =
plugin3 =
plugin4 =
plugin5 =
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = false
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot (hard reboot), setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; when fatalfreeze is set to false and fatalreboot is set to true, setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
safereboot = false
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7FFF
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
dumpfile =
; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
; and thus extends the length of time the boot animation will be displayed onscreen
; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
; if set too long other wonky things happen
; note this value is interpreted as hexidecimal when preceded with 0x, valid range is 0 to 0xFFFFFFFF
; if not set this value will be put to 0x2A (42)
bootdelay = 0x2A
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false
; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false
; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
hddalive = false
; in seconds, the interval between when USB devices will be polled for "alive.txt" file
hddtimer = 210
; all comments and fields in this file are optional, you can remove anything you don't need - section headers []
; are required for any used options under the section
; sorry for any double negatives :p
; njoy, cOz
En mi caso ha sido al ejecutar el instalador... me ha hecho como 15 preguntas si no mas, y la verdad... no tengo ni idea de que era lo que me preguntaba.
Cual es el campo que debo cambiar para que vuelva a funcionar la "x"
Serias tan amable de contestar un mp que te he enviado.
Muchas gracias