Me funciona perfectamente el GentooX pero no me detecta la tarjeta de red creo, y eso que lo configuré como pone en la web.
Networking Tutorial
If you don’t have DHCP, you can still setup your own networking using static settings once the xbox has booted. To do this, follow these instructions.
1) Login as root in konsole in KDE by typing “su –“ then enter your password
2) Type “pico –w /etc/conf.d/net
3) You will be faced by a rather frightening looking text file, look for the line “iface_eth0="dhcp"” and add a hash (#) before it so it looks like this: “#iface_eth0="dhcp"”.
4) Next, look for the line “#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0"” and remove the hash (#) from the beginning and proceed to enter your own static details. In my case, I use IP address 192.168.1.104 for my xbox so I would change the settings to:
“iface_eth0="192.168.1.104 broadcast 192.168.1.255 netmask 255.255.255.0"” --- the bold letters indicate what has changed. In the first set of numbers (aaa.bbb.ccc.ddd), whatever ccc is set to, it MUST be set the same in the second set of numbers, in this case they are both “1”. The broadcast should always have “255” on the end. All PCs on your network must have the same “ccc” number, i.e. all computers on my network are “192.168.1.ddd”, all the computers must have individual “ddd” numbers.
5) Finally, if you have a gateway to connect through to access the internet or your network, you must find the line “#gateway="eth0/192.168.0.1", un hash it (#), and change it appropriately. Siince my router is my gateway (which has the IP 192.168.1.1), I would change the to:
“gateway="eth0/192.168.1.1"” --- the bold letters indicate what was changed. If you’re networking your Xbox through a second network card in your PC, then your gateway will be your PC’s second network card’s IP address.
If you don’t know your internet settings you may be able to ask your ISP for them or go to their website help section. If you are on a network, ask your network technician.
6) Once you have made all the necessary changes, hit ctrl+x, ‘y’, then [enter] to save the file.
7) If you’re having trouble accessing webpages like http://www.yahoo.com but can access IP addresses fine then you probably have a DNS issue. To solve this, run the following:
“echo > /etc/resolv.conf”
“pico –w /etc/resolv.conf” (Yes, it is resolv, not resolve)
You will then be faced with an empty text file in which you must put in your ISP’s nameservers. Again, you will need to look on your ISP’s website for this information. In my case, my nameservers are “194.168.8.100” and “194.168.4.100” so in the file I put:
nameserver 194.168.8.100
nameserver 194.168.4.100
(note nameserver is all lowercase).
8) Once you have made all the necessary changes, hit ctrl+x, ‘y’, then [enter] to save the file.
9) The best way to test these settings have been saved and are functional is to reboot so, type “reboot” in the console and load Gentoox up again. Once it comes up, open konsole and type “ping [url]www.yahoo.com”[/url] if this works, great… however, if it doesn’t, try “ping 64.58.76.230”, if this works then you need to repeat step 7 as your DNS servers have not been configured correctly.
jescrayl
Adicto
109 mensajes desde ene 2003 en Soy de Cordoba, resido en
