› Foros › PlayStation 2 › Modchips › Modbios
Escrito originalmente por potros
Perdón, pero...
[carcajad][carcajad][carcajad][qmparto][qmparto]
Ahí está ese apoyo del foro... esas ganas de investigar... ese tiempo que regalar a los demás... y luego os atreveis a criticar a blakcat... es de risa.
Na... pa cuando este hilo llegue a las 846 respuestas que tiene actualmente el del magic casero rectificaré lo que he dicho... pero hasta entonces....
Olé Seymur por tu iniciativa, tus ideas, tus aportes, tu interes...
En fin... saludos y suerte.
Potros
El scenix necesita 6 u 8 ciclos para generar un ciclo de instruccion
An instruction goes through a four-stage pipeline to be
executed (Figure 15-1). The first instruction is fetched
from the program memory on the first clock cycle. On the
second clock cycle, the first instruction is decoded and
the second instruction is fetched. On the third clock cycle,
the first instruction is executed, the second instruction is
decoded, and the third instruction is fetched. On the
fourth clock cycle, the first instruction’s results are written
to its destination, the second instruction is executed, the
third instruction is decoded, and the fourth instruction is
fetched. Once the pipeline is full, instructions are executed
at the rate of one per clock cycle.
The instruction execution time is derived by dividing the
oscillator frequency by either one (turbo mode) or four
(non-turbo mode). The divide-by factor is selected
through the FUSE Word register.