@phonix3d No se si se puede poner el link de la otra web pero si buscais eb google como crear emummc atmosphere el que salga de gbatemp es ese, yo no probe esto ni se los riesgos que tiene solo comparto la informacion
Access NAND using PC
What you will need
- biskeydump
https://files.sshnuke.net/biskeydumpv8.zipRun the payload and write down (or scan QRCode) Bis Key 2
BIS KEY 2 (crypt): NUMBERS
BIS KEY 2 (tweak): NUMBERS
- memloader
https://files.sshnuke.net/memloaderv2.zipCopy *.* in [sample] folder to SD and plug it in the Switch
Run the payload [memloader.bin]
Unplug any USB cable
> Choose emmc line
> Plug USB C <> USB A cable to the Switch and PC
- HacDiskMount
https://files.sshnuke.net/HacDiskMount1055.zipRun the tool under Administrator permission
> Open Physical Disk > Choose Linux line
> Double click on SYSTEM and fill BisKeys2 in the small table on top
Crysto > BIS KEY 2 (crypt): NUMBERS
Tweak > BIS KEY 2 (tweak): NUMBERS
> Press on [Test] > you will get OK! Entropy
> From Drive Letter table > Choose a drive disk, N for example.
> Press on [Mount]
Install driver if needed.
Acess N drive from My Computer
> access save folder
> delete all files inside the save folder except 8000000000000120
> Press on [Unmount]
> Double click on USER and fill BisKeys3 in the small table on top
Crysto > BIS KEY 3 (crypt): NUMBERS
Tweak > BIS KEY 3 (tweak): NUMBERS
> Press on [Test] > you will get OK! Entropy
> From Drive Letter table > Choose a drive disk, N for example.
> Press on [Mount]
Install driver if needed.
Acess N drive from My Computer and Delete Everything
> Press on [Unmount] and unplug the USB cable
> Press on [Power] button for 15s or so to reboot the system
> After rebooting, the system will be in initial setup stage.
