Mandrake 10

De repente ha dejado de automontarme los dispositivos USB que le conecto.
Tengo puesto el Applet de Dispositivos en una barra lateral, y siempre que conectaba alguna cosa al puerto USB me salia el icono en el Applet, ahora no sale nada, excepto cuando pongo un CDROM, pero ponga lo que ponga en el USB no me sale nada.
Si hago un usbview si que me reconoce el dispositivo
y el dmesg despues de conectar el dispositivo dice esto :

usb 1-1: new full speed USB device using address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: 256MB Model: HardDrive Rev: 1.88
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: inconsistent partition table (overlap)
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb 1-1: USB disconnect, address 2
usb 2-1: new full speed USB device using address 2
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: 256MB Model: HardDrive Rev: 1.88
Type: Direct-Access ANSI SCSI revision: 02
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: inconsistent partition table (overlap)
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb 2-1: USB disconnect, address 2
usb 4-2: new high speed USB device using address 2
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: ST340824 Model: A Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: assuming drive cache: write through
/dev/scsi/host2/bus0/target0/lun0: p1 p2 < p5 >
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb 4-2: USB disconnect, address 2
usb 4-1: new high speed USB device using address 3
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: ST340824 Model: A Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: assuming drive cache: write through
/dev/scsi/host3/bus0/target0/lun0: p1 p2 < p5 >
Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
usb 4-1: USB disconnect, address 3
usb 4-1: new high speed USB device using address 4
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: ST340824 Model: A Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: assuming drive cache: write through
/dev/scsi/host4/bus0/target0/lun0: p1 p2 < p5 >
Attached scsi disk sda at scsi4, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi4, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
usb 4-1: USB disconnect, address 4
is_leaf: free space seems wrong: level=1, nr_items=28, free_space=65344 rdkey
vs-5150: search_by_key: invalid format found in block 15319. Fsck?
vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [85 785 0x0 SD]
Unable to handle kernel paging request at virtual address 85e93d0b
printing eip:
e197ca99
*pde = 00000000
Oops: 0002 [#2]
CPU: 0
EIP: 0060:[] Not tainted VLI
EFLAGS: 00010287
EIP is at 0xe197ca99
eax: e197ca80 ebx: c3c7d3e0 ecx: 00000000 edx: 85e93d0b
esi: deff5800 edi: d9f6ddbc ebp: d9f6dd7c esp: d9f6dd78
ds: 007b es: 007b ss: 0068
Process msec_find (pid: 12580, threadinfo=d9f6c000 task=d47fa660)
Stack: c3c7d42c d9f6dd8c c0169593 c3c7d42c c3c7d42c d9f6dda0 c016a358 c3c7d42c
c3c7d42c d9f6de48 d9f6ddb0 c016a420 c3c7d42c 00000000 d9f6ddd0 e1973738
c3c7d42c 00000311 00000055 d9f6dde4 00000001 deff5800 d9f6de80 e196f0c3
Call Trace:
[] clear_inode+0xc3/0xd0
[] generic_forget_inode+0x108/0x160
[] iput+0x50/0x70
[] 0xe1973738
[] 0xe196f0c3
[] d_lookup+0x1c/0x50
[] real_lookup+0xa3/0xd0
[] do_lookup+0x68/0x80
[] link_path_walk+0x4cf/0x850
[] __user_walk+0x32/0x50
[] vfs_lstat+0x17/0x50
[] sys_lstat64+0x14/0x40
[] filldir64+0x0/0x110
[] sys_getdents64+0x65/0xa3
[] sys_getdents64+0x99/0xa3
[] sysenter_past_esp+0x52/0x79

Code: 0e 09 01 00 83 c4 20 8d 65 f8 5b 5e 5d c3 8d 74 26 00 55 89 e5 53 8b 5d 08 83 eb 4c 8b 53 38 85 d2 74 11 81 fa 18 fc ff ff 77 09 0a 0f 94 c0 84 c0 75 2e 8b 53 3c c7 43 38 00 00 00 00 85 d2
<6>usb 4-1: new high speed USB device using address 5
scsi5 : SCSI emulation for USB Mass Storage devices
Vendor: ST340824 Model: A Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: assuming drive cache: write through
/dev/scsi/host5/bus0/target0/lun0: p1 p2 < p5 >
Attached scsi disk sda at scsi5, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi5, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 5
FAT: invalid media value (0x58)
VFS: Can't find a valid FAT filesystem on dev sda2.
inserting floppy driver for 2.6.3-4mdk
floppy0: Unable to grab IRQ6 for the floppy driver
usb 4-1: USB disconnect, address 5
usb 4-1: new high speed USB device using address 6
scsi6 : SCSI emulation for USB Mass Storage devices
Vendor: ST340824 Model: A Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: assuming drive cache: write through
/dev/scsi/host6/bus0/target0/lun0: p1 p2 < p5 >
Attached scsi disk sda at scsi6, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi6, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 6
usb 4-1: USB disconnect, address 6
usb 4-1: new high speed USB device using address 7
scsi7 : SCSI emulation for USB Mass Storage devices
Vendor: ST340824 Model: A Rev: 0 0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: assuming drive cache: write through
/dev/scsi/host7/bus0/target0/lun0: p1 p2 < p5 >
Attached scsi disk sda at scsi7, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi7, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 7
No se lo que te puede pasar... pero te recomiendo que para otra vez seas mas explicito con el titulo...
"Mandrake 10" no ayuda en nada.
Salu2 :-|
eaTHaN escribió:No se lo que te puede pasar... pero te recomiendo que para otra vez seas mas explicito con el titulo...
"Mandrake 10" no ayuda en nada.
Salu2 :-|


Tienes razón, de hecho el titulo original era Mandrake 10 y automount, pero al pegar el texto del dmesg se me fue el dedo y lo mande sin corregir
2 respuestas