NEO 2.X Instalación Perfecta DVD-R en V5 / V6

NEO2.x mod-chip working with FULL E.A / DVD-R swap using 3 resistors.
Keeping in mind the other PINs go to their normal NEO2.x solder points, here is the NEO2.x E.A. diagram.

Basically what you'll need to do is carefully desolder PINs #1 and #2 of the BA Chip and then solder the 12c508 chip side of the resistors to them according to the diagram. (read wires)

Then, you'll need to solder the side of the resistors which points away from the 12c508 chip to the pads which were left where you desoldered PINs #1 and #2 of the BA Chip on the PS2 mainboard. (blue wires)




Saludos,
maXtor