Welcome to the S60 version
of Picodrive!
Credits
-------
This work is mainly based on
Picodrive by Dave,
(
http://www.finalburn.com)
with added sound support and other improvements by Notaz
(
http://notaz.atspace.com).
ARM asm Z80 core is provided by DrZ80 by Reezy
(
http://reesy.gp32x.de/)
and YM2612 and SN76489 support are provided by the M.A.M.E project
(
http://www.mame.net/).
See credits within Picodrive for more information.
Instructions
------------
Picodrive S60 is a Megadrive/ Genesis emulator which enables you to play old games on your S60 phone.
This zip contains two different versions.
One sis file called PicoDriveS601st.sis and one called PicoDriveS602nd.sis
The PicoDriveS601st.sis is to be used to S60 Version first edition device (N-Gage for example) and the PicoDriveS602nd.sis is to be used for S60 second edition devices.
(Nokia 6600, 6630, 6680 etc). Check the manual for your particular phone to see which you should run.
When its started you are presented with a main menu.
Use arrows to navigate up and down in the menu and use left softkey or the middle button to select an option
* Load ROM
Displays a simple built in filebrowser. Displays the last folder you browsed,and default this is top level, with a drive listine (E: is your memory card)
Use the left soft key (right softkey will cancel) and then navigate until you are in the folder with your rom files.
Use the left softkey to select a file, and emulation will comence as soon as the rom has been loaded.
Supported data types are either SMD,BIN or a ZIP with a single SMD or BIN file inside.
* Load state
Only working when a rom has been loaded, used to load a saved game state for the currently loaded rom. Emulation will resume automatically when the state has been loaded.
* Save state
Only working when a rom has been loaded. Saves the current state of a rom.
* Configure controls
Lets you configure the controls to use for game play.
Only one control at port 1 is supported. It might be either a 3 button or 6 button joypad.
Select using the confirm/left softkey and return to the main menu using the 'C' key.
Default is
3 button pad.
Up - Joystick up
Down - Joystick down
Left - Joystick left
Right - Joystick right
A - Left soft key
B - Middle/confirm key
C - Right soft key
X - Not configured
Y - Not configured
Z - Not configured
Start - '0' key
Up&Left - Not configured
Up&Right - Not configured
Down&Right - Not configured
Down&Left - Not configured
'C' key is used to get back to the main menu when running the emulation and should not be used for anything else.
3 button pad/6 button pad - Selects to toggle between the two pad types
Configure keys - Select this to redefine the key bindings
Press the key you want to assign to the requested action.
You can assign the same key to the same action, and is good if you dont need the 8 way controls.
* Configure screen
Lets you configure the screen mode and frameskip.
Use left softkey or confirm key to select mode. After adjust interpolate or frameskip, select a screen mode to exit the menu
Portrait is a scaled mode, to 176x168 (default)
Landscape modes are a portrait mode which scales down to 208x168
Portrait stretched is a scaled modenot in aspect, and scales to 176x208
Interpolate on means that a scanline is interpolated to a smoother look, but this also requires more cpu.
(default on)
Frameskip lets you decide if you want to set your own constant frameskip or let the action decide
(default is auto)
* Configure sound
Lets you configure sound settings.
Use confirm or left soft key to change a value and use the 'c' key to exit to the main menu
Z80 - Used in many games to drive the sound Will cost a penalty in shown FPS, but can increase compability if enabled even if sound is turned off.
(default is on)
YM2612 - FM OPL sound Enable for FM sound
(default is on)
SN76496 - TI Sound chip - Enable for sound
(default is on)
Volume - Select to change volume
(Default is 60%)
Sample rate - Select to toggle between 8Khz,11Khz,16Khz and 22Khz. If you select a rate which is not compatible with your phone it will be reset back to 8Khz.
(default is 8KHZ)
* Reset
Will reset the current rom if loaded, and resume execution from the start
* Credits
Displays a full credits list for the Picodrive project
* Exit
Exit Picodrive
Last line will display the name of the rom currently loaded
Please enjoy and have fun.