a ver..............
que nos estamos liando......... [ok] Oooh
las que se pueden overclokear y pasr a escritura p-cav.....
LTR-0841-->LTR-12101B: possible, sanyo chipset
LTR-12101B: Not upgradable, sanyo chipset
LTR-12102B: Not upgradable, mediatek chipset
LTR-12101C-->LTR-16101B: maybe possible?, sanyo chipset
LTR-12102C: Not upgradable? mediatek chipset.
LTR-16101B: Not upgradable, sanyo chipset
LTR-16102B: Not upgradable, mediatek chipset
LTR-16102C-->LTR-24102B, possible, mediatek chipset.
LTR-24101B: Not upgradaple, sanyo? chipset?
LTR-24102B: Not upgradable, mediatek chipset.
LTR-24103S-->LTR-32123S: possible, mediatek chipset.
LTR-32123S: Not upgradable!, mediatek chipset.
LTR-32125W-->LTR-48125W, possible, mediatek chipset.
LTR-40125S-->LTR-48125W, possible, mediatek chipset.
LTR-40125W-->LTR-48125W, possible, mediatek chipset.
LTR-48125W: Not upgradable, mediatek chipset.
LTR-48126?-->LTR-48246?, most likely possible, mediatek chipset.
LTR-48166?-->LTR-48246?, most likely possible, mediatek chipset.
LTR-48126?-->LTR-52326?, Maybe possible?, mediatek chipset.
LTR-48166?-->LTR-52326?, Maybe possible?, mediatek chipset.
LTR-48246?-->LTR-52326?, Maybe possible?, mediatek chipset.
LTR-52326?: Most likely not upgradable, mediatek chipset.
LTD-163: Not upgradable, mediatek chipset.
LTD-163D: Not upgradable, mediatek chipset.
LTD-165H: Not upgradable, mediatek chipset.
Q: I do only get ??X shown as the maximum recording speed, but my drive supports faster speeds!!
A: Lite-On drives features Smart-BURN technology which limits the recording speeds due to manufacturer of the media, media type and condition of the media. Only speeds that the inserted media(or if drive is empty: the last inserted media) supports will be shown. Insert media that the drive supports writing at highest speed before you start the program to get the highest speed shown.
Q: I do only get 12X shown as the maximum reading speed, but my drive supports faster speeds!!
A: Lite-On drives features Smart-X technology which limits the reading speeds due to type of disc and the condition of the disc. Only speeds that the drive supports reading the inserted disc(or if drive is empty: the last inserted disc) at will be shown. Insert media that the drive supports reading at highest speed before you start the program to get the highest speed shown.
Q: My drive uses 10-20 minutes when writing a CD, it should take less time. And the LED is flashing between RED and ORANGE.
A:Most likely DMA is not enabled for the drive. DMA(Direct Memory Access) is needed to get high enough transfer rate when writing at high speeds.
Q: How do I enable DMA then?
A: In w9x/ME: Go to device manager --> CD-ROM's--> find your writer and check it's properties. There it should be a checkbox for DMA, make sure it's checked.
http://club.cdfreaks.com/showthread.php&threadid=42344
sacao de de donde siempre ........