Problema montar unidad CD/DVD en Ubuntu Feisty

Pega tu /etc/fstab

Riot escribió:Pega tu /etc/fstab

Creo que te refieres a esto:

# /etc/fstab: static file system information.
#
#
proc /proc proc defaults 0 0
# /dev/hdc1
UUID=a63f254a-0c3d-4623-88ac-086a2b9c8432 / ext3 defaults,errors=remount-ro 0 1
# /dev/hdc5
UUID=7b51e76c-fa5b-42e4-a964-f7453092e56c none swap sw 0 0
/dev/hdb /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0

Alomejor tu problema tiene relación con l ocomentado en este post:
http://www.elotrolado.net/showthread.php?s=&threadid=759990

EagleScreen escribió:Alomejor tu problema tiene relación con l ocomentado en este post:
http://www.elotrolado.net/showthread.php?s=&threadid=759990

Gracias por la respuesta EagleScreen pero si tiene relación con el post que me has puesto, yo al menos no se la veo. Soy noob en el mundo de linux y ando un poco perdido.

Saludos y gracias

Aun sigo buscando una respuesta

has un dmesg y busca donde te ha colocado los DVDs..


sl1pkn07@SpinFlo:~$ dmesg |grep DVD
[ 53.040752] hdc: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive
[ 53.915561] hdd: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive
[ 54.321974] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
[ 54.466716] hdd: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
sl1pkn07@SpinFlo:~$

sL1pKn07 escribió:has un dmesg y busca donde te ha colocado los DVDs..

Te pego lo que me sale...

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: 000000003fff8000 type: 3
[ 0.000000] copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffee0000 size: 0000000000020000 end: 00000000fff00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fbc70
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 AMI ) @ 0x000fa480
[ 0.000000] ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x3fff0000
[ 0.000000] ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x3fff0030
[ 0.000000] ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x3fff00c0
[ 0.000000] ACPI: DSDT (v001 SiS 746 0x00000100 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:3 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:3 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 3196.132 MHz processor.
[ 85.053769] Built 1 zonelists. Total pages: 260081
[ 85.053774] Kernel command line: root=UUID=a63f254a-0c3d-4623-88ac-086a2b9c8432 ro quiet splash
[ 85.053926] mapped APIC to ffffd000 (fee00000)
[ 85.053928] mapped IOAPIC to ffffc000 (fec00000)
[ 85.053932] Enabling fast FPU save and restore... done.
[ 85.053934] Enabling unmasked SIMD FPU exception support... done.
[ 85.053947] Initializing CPU#0
[ 85.054023] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 85.055356] Console: colour VGA+ 80x25
[ 85.056019] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 85.056605] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 85.078290] Memory: 1028060k/1048512k available (1992k kernel code, 19720k reserved, 893k data, 328k init, 131008k highmem)
[ 85.078300] virtual kernel memory layout:
[ 85.078301] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 85.078302] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 85.078303] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 85.078304] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 85.078305] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 85.078306] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 85.078307] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 85.078310] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 85.157897] Calibrating delay using timer specific routine.. 6395.78 BogoMIPS (lpj=12791572)
[ 85.157948] Security Framework v1.0.0 initialized
[ 85.157957] SELinux: Disabled at boot.
[ 85.157976] Mount-cache hash table entries: 512
[ 85.158159] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 85.158168] monitor/mwait feature present.
[ 85.158169] using mwait in idle threads.
[ 85.158176] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 85.158179] CPU: L2 cache: 1024K
[ 85.158182] CPU: Physical Processor ID: 0
[ 85.158184] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[ 85.158197] Compat vDSO mapped to ffffe000.
[ 85.158203] Remapping vsyscall page to ffffe000
[ 85.158219] Checking 'hlt' instruction... OK.
[ 85.174024] SMP alternatives: switching to UP code
[ 85.174536] Early unpacking initramfs... done
[ 85.440353] ACPI: Core revision 20060707
[ 85.441147] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 85.442656] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
[ 85.442680] SMP alternatives: switching to SMP code
[ 85.442820] Booting processor 1/1 eip 3000
[ 85.453363] Initializing CPU#1
[ 85.533426] Calibrating delay using timer specific routine.. 6392.16 BogoMIPS (lpj=12784332)
[ 85.533436] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 85.533443] monitor/mwait feature present.
[ 85.533450] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 85.533453] CPU: L2 cache: 1024K
[ 85.533455] CPU: Physical Processor ID: 0
[ 85.533458] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[ 85.533827] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
[ 85.533869] Total of 2 processors activated (12787.95 BogoMIPS).
[ 85.533966] ENABLING IO-APIC IRQs
[ 85.534140] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 85.681251] checking TSC synchronization across 2 CPUs: passed.
[ 0.003993] Brought up 2 CPUs
[ 0.157422] migration_cost=209
[ 0.157732] Booting paravirtualized kernel on bare hardware
[ 0.157816] Time: 19:14:05 Date: 04/04/107
[ 0.157850] NET: Registered protocol family 16
[ 0.157949] EISA bus registered
[ 0.157955] ACPI: bus type pci registered
[ 0.159359] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
[ 0.159361] PCI: Using configuration type 1
[ 0.159363] Setting up standard PCI resources
[ 0.164653] ACPI: Interpreter enabled
[ 0.164657] ACPI: Using IOAPIC for interrupt routing
[ 0.165090] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.165098] PCI: Probing PCI hardware (bus 00)
[ 0.165493] Enabling SiS 96x SMBus.
[ 0.166044] Boot video device is 0000:01:00.0
[ 0.166101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.169580] ACPI: Power Resource [URP1] (off)
[ 0.169652] ACPI: Power Resource [URP2] (off)
[ 0.169717] ACPI: Power Resource [FDDP] (off)
[ 0.169782] ACPI: Power Resource [LPTP] (off)
[ 0.170580] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.170810] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.171039] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.171271] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.171507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.171737] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.171972] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.172198] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.172321] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.172333] pnp: PnP ACPI init
[ 0.175073] pnp: PnP ACPI: found 12 devices
[ 0.175078] PnPBIOS: Disabled by ACPI PNP
[ 0.175135] PCI: Using ACPI for IRQ routing
[ 0.175139] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.178482] NET: Registered protocol family 8
[ 0.178484] NET: Registered protocol family 20
[ 0.179019] PCI: Bridge: 0000:00:01.0
[ 0.179021] IO window: disabled.
[ 0.179027] MEM window: cdd00000-cfefffff
[ 0.179031] PREFETCH window: ada00000-cdbfffff
[ 0.179080] NET: Registered protocol family 2
[ 0.227772] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.227956] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.228674] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.229164] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.229168] TCP reno registered
[ 0.243875] checking if image is initramfs... it is
[ 0.769273] Freeing initrd memory: 7006k freed
[ 0.769986] audit: initializing netlink socket (disabled)
[ 0.770005] audit(1178306045.476:1): initialized
[ 0.770113] highmem bounce pool size: 64 pages
[ 0.770213] VFS: Disk quotas dquot_6.5.1
[ 0.770238] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.770306] io scheduler noop registered
[ 0.770310] io scheduler anticipatory registered
[ 0.770312] io scheduler deadline registered
[ 0.770325] io scheduler cfq registered (default)
[ 0.770583] isapnp: Scanning for PnP cards...
[ 1.122016] isapnp: No Plug & Play device found
[ 1.148381] Real Time Clock Driver v1.12ac
[ 1.148438] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.148559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.149274] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.149501] mice: PS/2 mouse device common for all mice
[ 1.150143] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.150310] input: Macintosh mouse button emulation as /class/input/input0
[ 1.150350] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.150354] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.150615] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.150797] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.150802] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.150915] EISA: Probing bus 0 at eisa.0
[ 1.150953] EISA: Detected 0 cards.
[ 1.181013] TCP cubic registered
[ 1.181022] NET: Registered protocol family 1
[ 1.181051] Starting balanced_irq
[ 1.181059] Using IPI No-Shortcut mode
[ 1.181143] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.181230] ACPI: (supports S0 S1 S4 S5)
[ 1.181273] Magic number: 7:476:242
[ 1.181337] hash matches device ttysf
[ 1.181770] Freeing unused kernel memory: 328k freed
[ 1.182511] Time: tsc clocksource has been installed.
[ 2.408325] Capability LSM initialized
[ 2.920444] SCSI subsystem initialized
[ 2.946676] libata version 2.20 loaded.
[ 2.948937] pata_sis 0000:00:02.5: version 0.5.1
[ 2.949047] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14
[ 2.949092] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
[ 2.949117] scsi0 : pata_sis
[ 3.009480] usbcore: registered new interface driver usbfs
[ 3.009515] usbcore: registered new interface driver hub
[ 3.009556] usbcore: registered new device driver usb
[ 3.078761] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.080560] Floppy drive(s): fd0 is 1.44M
[ 3.085766] sis900.c: v1.08.10 Apr. 2 2006
[ 3.087969] 8139too Fast Ethernet driver 0.9.28
[ 3.103684] FDC 0 is a post-1991 82077
[ 10.102879] ata1: port is slow to respond, please be patient (Status 0x90)
[ 33.088927] ata1: port failed to respond (30 secs, Status 0x90)
[ 33.936191] ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 33.936196] ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
[ 33.936198] ata1.00: 390721968 sectors, multi 16: LBA48
[ 33.944173] ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 33.944176] ata1.00: configured for UDMA/100
[ 33.959803] scsi1 : pata_sis
[ 34.123951] ata2.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
[ 34.123956] ata2.00: ATA-6: ST340810A, 3.99, max UDMA/100
[ 34.123958] ata2.00: 78165360 sectors, multi 16: LBA
[ 34.135919] ata2.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
[ 34.135921] ata2.00: configured for UDMA/100
[ 34.136064] scsi 0:0:0:0: Direct-Access ATA ST3200822A 3.01 PQ: 0 ANSI: 5
[ 34.136318] scsi 1:0:0:0: Direct-Access ATA ST340810A 3.99 PQ: 0 ANSI: 5
[ 34.136673] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 34.136691] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 34.136968] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 34.136988] ohci_hcd 0000:00:03.0: irq 16, io mem 0xcfffd000
[ 34.193636] usb usb1: configuration #1 chosen from 1 choice
[ 34.193676] hub 1-0:1.0: USB hub found
[ 34.193690] hub 1-0:1.0: 3 ports detected
[ 34.299492] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 34.299515] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 34.299554] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 34.299575] ohci_hcd 0000:00:03.1: irq 17, io mem 0xcfffe000
[ 34.357387] usb usb2: configuration #1 chosen from 1 choice
[ 34.357429] hub 2-0:1.0: USB hub found
[ 34.357442] hub 2-0:1.0: 3 ports detected
[ 34.464788] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 18
[ 34.464814] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 34.464878] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 34.464937] PCI: cache line size of 128 is not supported by device 0000:00:03.2
[ 34.464954] ehci_hcd 0000:00:03.2: irq 18, io mem 0xcffff000
[ 34.464968] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 34.465110] usb usb3: configuration #1 chosen from 1 choice
[ 34.465157] hub 3-0:1.0: USB hub found
[ 34.465168] hub 3-0:1.0: 6 ports detected
[ 34.571207] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 34.572410] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 34.582423] 0000:00:04.0: Using transceiver found at address 1 as default
[ 34.583141] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 19, 00:0b:6a:8e:b6:1a.
[ 34.583299] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 34.583620] eth1: RealTek RTL8139 at 0xf8848f00, 00:13:46:3b:b7:71, IRQ 19
[ 34.583624] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[ 34.602886] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 34.602907] sda: Write Protect is off
[ 34.602911] sda: Mode Sense: 00 3a 00 00
[ 34.602937] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.603030] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 34.603045] sda: Write Protect is off
[ 34.603049] sda: Mode Sense: 00 3a 00 00
[ 34.603074] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.603081] sda: sda1
[ 34.608154] sd 0:0:0:0: Attached scsi disk sda
[ 34.609099] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
[ 34.609121] sdb: Write Protect is off
[ 34.609125] sdb: Mode Sense: 00 3a 00 00
[ 34.609149] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.609225] SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
[ 34.609240] sdb: Write Protect is off
[ 34.609243] sdb: Mode Sense: 00 3a 00 00
[ 34.609270] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.609275] sdb: sdb1 sdb2 < sdb5 >
[ 34.666462] sd 1:0:0:0: Attached scsi disk sdb
[ 34.673329] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 34.673365] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 35.043409] Attempting manual resume
[ 35.043414] swsusp: Resume From Partition 8:21
[ 35.043415] PM: Checking swsusp image.
[ 35.043650] PM: Resume from disk failed.
[ 35.057231] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.057238] EXT3-fs: write access will be enabled during recovery.
[ 35.282071] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 35.577694] usb 3-2: new high speed USB device using ehci_hcd and address 3
[ 35.747153] usb 3-2: configuration #1 chosen from 1 choice
[ 36.420591] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 36.717222] usb 2-2: configuration #1 chosen from 1 choice
[ 37.023804] usb 2-3: new full speed USB device using ohci_hcd and address 3
[ 37.239446] usb 2-3: configuration #1 chosen from 1 choice
[ 37.547124] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 38.737582] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 39.928035] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 41.118475] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 42.308923] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 42.612528] usb 1-1: new full speed USB device using ohci_hcd and address 7
[ 43.802981] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 44.691206] kjournald starting. Commit interval 5 seconds
[ 44.691222] EXT3-fs: sdb1: orphan cleanup on readonly fs
[ 44.691229] ext3_orphan_cleanup: deleting unreferenced inode 4177960
[ 44.691257] EXT3-fs: sdb1: 1 orphan inode deleted
[ 44.691259] EXT3-fs: recovery complete.
[ 44.722947] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.993429] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 46.183891] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 47.374331] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 47.677936] usb 1-1: new full speed USB device using ohci_hcd and address 11
[ 48.868388] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 50.058836] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 51.249288] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 52.439740] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 52.743342] usb 1-1: new full speed USB device using ohci_hcd and address 15
[ 53.933817] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 55.124254] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 56.314710] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 56.596536] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 57.505160] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 57.808779] usb 1-1: new full speed USB device using ohci_hcd and address 19
[ 57.911988] NET: Registered protocol family 17
[ 58.133723] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 58.209850] Linux agpgart interface v0.102 (c) Dave Jones
[ 58.212468] agpgart: Detected SiS 661 chipset
[ 58.217651] agpgart: AGP aperture is 64M @ 0xe0000000
[ 58.321226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 58.353061] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 58.370972] parport: PnPBIOS parport detected.
[ 58.371074] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 58.431526] input: PC Speaker as /class/input/input2
[ 58.608699] eth0: Media Link On 100mbps full-duplex
[ 58.723712] Bluetooth: Core ver 2.11
[ 58.723878] NET: Registered protocol family 31
[ 58.723881] Bluetooth: HCI device and connection manager initialized
[ 58.723887] Bluetooth: HCI socket layer initialized
[ 58.773875] Bluetooth: HCI USB driver ver 2.9
[ 58.928444] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 58.967379] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 58.999239] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 59.286825] intel8x0_measure_ac97_clock: measured 55975 usecs
[ 59.286828] intel8x0: clocking to 48000
[ 60.189661] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 61.380106] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 62.570558] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 62.706749] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17
[ 62.706768] usbcore: registered new interface driver usblp
[ 62.706773] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 62.874166] usb 1-1: new full speed USB device using ohci_hcd and address 23
[ 63.074894] usb 1-1: not running at top speed; connect to a high speed hub
[ 63.093003] usb 1-1: configuration #1 chosen from 1 choice
[ 63.160920] usbcore: registered new interface driver hci_usb
[ 63.186597] usbcore: registered new interface driver libusual
[ 63.200756] Initializing USB Mass Storage driver...
[ 63.200875] scsi2 : SCSI emulation for USB Mass Storage devices
[ 63.200968] usbcore: registered new interface driver usb-storage
[ 63.200972] USB Mass Storage support registered.
[ 63.201139] usb-storage: device found at 23
[ 63.201143] usb-storage: waiting for device to settle before scanning
[ 63.346457] fuse init (API version 7.8)
[ 63.365740] lp0: using parport0 (interrupt-driven).
[ 63.401418] Adding 1646620k swap on /dev/disk/by-uuid/7b51e76c-fa5b-42e4-a964-f7453092e56c. Priority:-1 extents:1 across:1646620k
[ 63.586525] EXT3 FS on sdb1, internal journal
[ 63.720287] NET: Registered protocol family 10
[ 63.720452] lo: Disabled Privacy Extensions
[ 67.758687] input: Power Button (FF) as /class/input/input4
[ 67.758723] ACPI: Power Button (FF) [PWRF]
[ 67.758782] input: Power Button (CM) as /class/input/input5
[ 67.758810] ACPI: Power Button (CM) [PWRB]
[ 68.030823] Using specific hotkey driver
[ 68.072464] ibm_acpi: ec object not found
[ 68.120517] No dock devices found.
[ 68.196353] usb-storage: device scan complete
[ 68.198124] pcc_acpi: loading...
[ 68.203396] scsi 2:0:0:0: Direct-Access Generic USB Storage-CFC I16A PQ: 0 ANSI: 0 CCS
[ 68.210342] scsi 2:0:0:1: Direct-Access Generic USB Storag***** I16A PQ: 0 ANSI: 0 CCS
[ 68.218403] scsi 2:0:0:2: Direct-Access Generic USB Storage-SMC I16A PQ: 0 ANSI: 0 CCS
[ 68.224329] scsi 2:0:0:3: Direct-Access Generic USB Storage-SDC I16A PQ: 0 ANSI: 0 CCS
[ 68.236368] sd 2:0:0:0: Attached scsi removable disk sdc
[ 68.236435] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 68.246351] sd 2:0:0:1: Attached scsi removable disk sdd
[ 68.246424] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 68.257336] sd 2:0:0:2: Attached scsi removable disk sde
[ 68.257399] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 68.271245] sd 2:0:0:3: Attached scsi removable disk sdf
[ 68.271310] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 73.945186] ppdev: user-space parallel port driver
[ 74.982620] apm: BIOS not found.
[ 75.256840] Bluetooth: L2CAP ver 2.8
[ 75.256847] Bluetooth: L2CAP socket layer initialized
[ 75.266374] Bluetooth: RFCOMM socket layer initialized
[ 75.266397] Bluetooth: RFCOMM TTY layer initialized
[ 75.266400] Bluetooth: RFCOMM ver 1.8
[ 183.573040] eth0: no IPv6 routers present

No me sale por ningun lado DVD, CD, HDD, HDB... a lo mejor lo estoy haciendo mal.

Saludos y gracias por la ayuda!

po va a ser ke no te detecta los dvd.... ke cosa mas rara....

te los detecta el K3b? si pones "wodim -devices" dice algo?

Curioso, bueno, hagamos una prueba a ver si es lo que yo me sospecho..
Ponte en un terminal como root:
$ sudo su

Comprueba que existe el directorio /media/cdrom0:
$ ls /media

Si no existiese lo creas:
$ mkdir /media/cdrom0

Introduce un CD-ROM en la unidad lectora.

Ahora trata de montar el CD así:
$ mount /dev/scd0 /media/cdrom0

Osi no así:
$ mount /dev/scd1 /media/cdrom0

Ahora comprueba si en /media/cdrom0 está el contenido del CD:
$ ls /media/cdrom0

Para desmontarlo sería:
$ umount /dev/scdx
(x será 0 ó 1)

Si te funciona esto es buena señal, luego ya verremos como hacer que se haga automáticamente cuando insertes los CDs.
EDITO:
Sería útil que nos pegases el contenido de hacer:
$ls /dev

sL1pKn07 escribió:po va a ser ke no te detecta los dvd.... ke cosa mas rara....

te los detecta el K3b? si pones "wodim -devices" dice algo?

Tecleo eso de "wodim -devices" y ...

javier@estudio:~$ wodim -devices
Beginning native device scan. This may take a while if devices are busy...
wodim: Overview of accessible drives (0 found) :
----------------------------------------------------------------------
----------------------------------------------------------------------

EagleScreen escribió:Sería útil que nos pegases el contenido de hacer:
$ls /dev

root@estudio:/home/javier# ls /dev
acpi ptyd4 ptysb ptyy2 tty28 ttycc ttyS1 ttyx6
adsp ptyd5 ptysc ptyy3 tty29 ttycd ttys2 ttyx7
agpgart ptyd6 ptysd ptyy4 tty3 ttyce ttyS2 ttyx8
audio ptyd7 ptyse ptyy5 tty30 ttycf ttys3 ttyx9
bus ptyd8 ptysf ptyy6 tty31 ttyd0 ttyS3 ttyxa
console ptyd9 ptyt0 ptyy7 tty32 ttyd1 ttys4 ttyxb
core ptyda ptyt1 ptyy8 tty33 ttyd2 ttys5 ttyxc
disk ptydb ptyt2 ptyy9 tty34 ttyd3 ttys6 ttyxd
dsp ptydc ptyt3 ptyya tty35 ttyd4 ttys7 ttyxe
fd ptydd ptyt4 ptyyb tty36 ttyd5 ttys8 ttyxf
fd0 ptyde ptyt5 ptyyc tty37 ttyd6 ttys9 ttyy0
full ptydf ptyt6 ptyyd tty38 ttyd7 ttysa ttyy1
fuse ptye0 ptyt7 ptyye tty39 ttyd8 ttysb ttyy2
hpet ptye1 ptyt8 ptyyf tty4 ttyd9 ttysc ttyy3
initctl ptye2 ptyt9 ptyz0 tty40 ttyda ttysd ttyy4
input ptye3 ptyta ptyz1 tty41 ttydb ttyse ttyy5
kmem ptye4 ptytb ptyz2 tty42 ttydc ttysf ttyy6
kmsg ptye5 ptytc ptyz3 tty43 ttydd ttyt0 ttyy7
log ptye6 ptytd ptyz4 tty44 ttyde ttyt1 ttyy8
loop0 ptye7 ptyte ptyz5 tty45 ttydf ttyt2 ttyy9
lp0 ptye8 ptytf ptyz6 tty46 ttye0 ttyt3 ttyya
MAKEDEV ptye9 ptyu0 ptyz7 tty47 ttye1 ttyt4 ttyyb
mem ptyea ptyu1 ptyz8 tty48 ttye2 ttyt5 ttyyc
mixer ptyeb ptyu2 ptyz9 tty49 ttye3 ttyt6 ttyyd
net ptyec ptyu3 ptyza tty5 ttye4 ttyt7 ttyye
null ptyed ptyu4 ptyzb tty50 ttye5 ttyt8 ttyyf
nvidia0 ptyee ptyu5 ptyzc tty51 ttye6 ttyt9 ttyz0
nvidiactl ptyef ptyu6 ptyzd tty52 ttye7 ttyta ttyz1
oldmem ptyp0 ptyu7 ptyze tty53 ttye8 ttytb ttyz2
parport0 ptyp1 ptyu8 ptyzf tty54 ttye9 ttytc ttyz3
port ptyp2 ptyu9 ram0 tty55 ttyea ttytd ttyz4
ppp ptyp3 ptyua ram1 tty56 ttyeb ttyte ttyz5
psaux ptyp4 ptyub ram10 tty57 ttyec ttytf ttyz6
ptmx ptyp5 ptyuc ram11 tty58 ttyed ttyu0 ttyz7
pts ptyp6 ptyud ram12 tty59 ttyee ttyu1 ttyz8
ptya0 ptyp7 ptyue ram13 tty6 ttyef ttyu2 ttyz9
ptya1 ptyp8 ptyuf ram14 tty60 ttyp0 ttyu3 ttyza
ptya2 ptyp9 ptyv0 ram15 tty61 ttyp1 ttyu4 ttyzb
ptya3 ptypa ptyv1 ram2 tty62 ttyp2 ttyu5 ttyzc
ptya4 ptypb ptyv2 ram3 tty63 ttyp3 ttyu6 ttyzd
ptya5 ptypc ptyv3 ram4 tty7 ttyp4 ttyu7 ttyze
ptya6 ptypd ptyv4 ram5 tty8 ttyp5 ttyu8 ttyzf
ptya7 ptype ptyv5 ram6 tty9 ttyp6 ttyu9 urandom
ptya8 ptypf ptyv6 ram7 ttya0 ttyp7 ttyua usbdev1.1_ep00
ptya9 ptyq0 ptyv7 ram8 ttya1 ttyp8 ttyub usbdev1.1_ep81
ptyaa ptyq1 ptyv8 ram9 ttya2 ttyp9 ttyuc usbdev1.2_ep00
ptyab ptyq2 ptyv9 random ttya3 ttypa ttyud usbdev1.2_ep02
ptyac ptyq3 ptyva rtc ttya4 ttypb ttyue usbdev1.2_ep81
ptyad ptyq4 ptyvb sda ttya5 ttypc ttyuf usbdev1.2_ep83
ptyae ptyq5 ptyvc sda1 ttya6 ttypd ttyv0 usbdev2.1_ep00
ptyaf ptyq6 ptyvd sdb ttya7 ttype ttyv1 usbdev2.1_ep81
ptyb0 ptyq7 ptyve sdb1 ttya8 ttypf ttyv2 usbdev3.1_ep00
ptyb1 ptyq8 ptyvf sdb2 ttya9 ttyq0 ttyv3 usbdev3.1_ep81
ptyb2 ptyq9 ptyw0 sdb5 ttyaa ttyq1 ttyv4 usbdev3.2_ep00
ptyb3 ptyqa ptyw1 sequencer ttyab ttyq2 ttyv5 usbdev3.2_ep02
ptyb4 ptyqb ptyw2 sequencer2 ttyac ttyq3 ttyv6 usbdev3.2_ep03
ptyb5 ptyqc ptyw3 sg0 ttyad ttyq4 ttyv7 usbdev3.2_ep81
ptyb6 ptyqd ptyw4 sg1 ttyae ttyq5 ttyv8 usbdev3.2_ep82
ptyb7 ptyqe ptyw5 shm ttyaf ttyq6 ttyv9 usbdev3.2_ep83
ptyb8 ptyqf ptyw6 snapshot ttyb0 ttyq7 ttyva usbdev3.3_ep00
ptyb9 ptyr0 ptyw7 snd ttyb1 ttyq8 ttyvb usbdev3.3_ep01
ptyba ptyr1 ptyw8 sndstat ttyb2 ttyq9 ttyvc usbdev3.3_ep81
ptybb ptyr2 ptyw9 stderr ttyb3 ttyqa ttyvd usblp0
ptybc ptyr3 ptywa stdin ttyb4 ttyqb ttyve vcs
ptybd ptyr4 ptywb stdout ttyb5 ttyqc ttyvf vcs1
ptybe ptyr5 ptywc tty ttyb6 ttyqd ttyw0 vcs2
ptybf ptyr6 ptywd tty0 ttyb7 ttyqe ttyw1 vcs3
ptyc0 ptyr7 ptywe tty1 ttyb8 ttyqf ttyw2 vcs4
ptyc1 ptyr8 ptywf tty10 ttyb9 ttyr0 ttyw3 vcs5
ptyc2 ptyr9 ptyx0 tty11 ttyba ttyr1 ttyw4 vcs6
ptyc3 ptyra ptyx1 tty12 ttybb ttyr2 ttyw5 vcs7
ptyc4 ptyrb ptyx2 tty13 ttybc ttyr3 ttyw6 vcs8
ptyc5 ptyrc ptyx3 tty14 ttybd ttyr4 ttyw7 vcsa
ptyc6 ptyrd ptyx4 tty15 ttybe ttyr5 ttyw8 vcsa1
ptyc7 ptyre ptyx5 tty16 ttybf ttyr6 ttyw9 vcsa2
ptyc8 ptyrf ptyx6 tty17 ttyc0 ttyr7 ttywa vcsa3
ptyc9 ptys0 ptyx7 tty18 ttyc1 ttyr8 ttywb vcsa4
ptyca ptys1 ptyx8 tty19 ttyc2 ttyr9 ttywc vcsa5
ptycb ptys2 ptyx9 tty2 ttyc3 ttyra ttywd vcsa6
ptycc ptys3 ptyxa tty20 ttyc4 ttyrb ttywe vcsa7
ptycd ptys4 ptyxb tty21 ttyc5 ttyrc ttywf vcsa8
ptyce ptys5 ptyxc tty22 ttyc6 ttyrd ttyx0 xconsole
ptycf ptys6 ptyxd tty23 ttyc7 ttyre ttyx1 zero
ptyd0 ptys7 ptyxe tty24 ttyc8 ttyrf ttyx2
ptyd1 ptys8 ptyxf tty25 ttyc9 ttys0 ttyx3
ptyd2 ptys9 ptyy0 tty26 ttyca ttyS0 ttyx4
ptyd3 ptysa ptyy1 tty27 ttycb ttys1 ttyx5

Me falla en el paso de montar el cd/dvd

root@estudio:/home/javier# mount /dev/scd0 /media/cdrom0
mount: el dispositivo especial /dev/scd0 no existe

Saludos y gracias por la ayuda

Viva Linux!!!!

Bueno es logico quen o te dejase montar ya que /dev/scd no existe en tu equipo.
Dime cuántos discos duros tienes en tu equipo y cuántas particiones tiene cada uno, y a ser posible si son primarias o lógicas, eso ayudará mucho.

Ahora mismo te respondo desde Windows Vista ... porque toqueteando se me ha jodido el Linux y el Windows XP.

Tengo dos discos duros uno de 200 gigas con el win XP y otro de 40 gigas con Linux. El único que tiene particion es el de Linux, tiene la que te hace en la instalacion, el swap-linux ese.

Dios que lio!!!

Cuando inicio con Windows XP me dice que el archivo system tiene un error y que repare con el CD de instalacion pero este no me deja reparar...

Saludos y gracias por la preocupacion, sois unos cracks!

Entonces no me cuadra el por qué hay un /dev/sdb2 y un /dev/sdb5 en tu equipo:

Podría ser que te haya puesto como /dev/sdb2 o como /dev/sdb5 la unidad de DVD?
Supongo que cuando has escrito desde Vista sería desde otro equipo porque si no.. ¿En qué disco lo tienes instalado?
Veo que según tu fstab /dev/hdb5 es tu partición de intercambio 'swap', por lo tanto podría ser que /dev/hdb2 sea tu unidad de DVD, repite lo que te dije de montar con mount en el mensaje anterior pero en lugar de /dev/scd0 usa /dev/sdb2 a ver si acertamos.

tienes una placa con jmicron controller?

EagleScreen escribió:Podría ser que te haya puesto como /dev/sdb2 o como /dev/sdb5 la unidad de DVD?
Supongo que cuando has escrito desde Vista sería desde otro equipo porque si no.. ¿En qué disco lo tienes instalado?
Veo que según tu fstab /dev/hdb5 es tu partición de intercambio 'swap', por lo tanto podría ser que /dev/hdb2 sea tu unidad de DVD, repite lo que te dije de montar con mount en el mensaje anterior pero en lugar de /dev/scd0 usa /dev/sdb2 a ver si acertamos.

Lo probé y nada

tienes una placa con jmicron controller?

Que yo sepa no

te lo digo porque habia problemas, a mi se me para en la mitad de todas as instalaciones de cualquier distro... y a mucha mas gente solo les bootea... el modelo mas conocido y usado que trae el jmicron es la asus p5b

marcgenou escribió:te lo digo porque habia problemas, a mi se me para en la mitad de todas as instalaciones de cualquier distro... y a mucha mas gente solo les bootea... el modelo mas conocido y usado que trae el jmicron es la asus p5b

No es mi caso, pero gracias por el apunte.

Saludos!

Pues no sé...
Lo único que de momento puedo decirte es que pruebes otras distribuciones a ver si te funcionan..

EagleScreen escribió:Pues no sé...
Lo único que de momento puedo decirte es que pruebes otras distribuciones a ver si te funcionan..

Lo voy a volver a instalar por si acaso, muchas gracias por contestarme.

Una pregunta mas, me puedes recomendar el boot de la BIOS?

Dvd primero, Floopy, los discos duros?...

Saludos y gracias de nuevo

floppy -> cdrom -> hd

sL1pKn07 escribió:floppy -> cdrom -> hd

Totalmente de acuerdo, ese es el orden de arranque más adecuado.