[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0E8000000 mask FFC000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 2f8e8000 - 30033769
[ 0.000000] ACPI: RSDP 000f72a0 00014 (v00 AWARD )
[ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fff30c0 03938 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fff0000 00040
[ 0.000000] ACPI: APIC 3fff6a00 00068 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [002f8e8000 - 0030033769] RAMDISK ==> [002f8e8000 - 0030033769]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00008a9000 - 00008ac08a] BRK ==> [00008a9000 - 00008ac08a]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f5940] f5940
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-15-generic root=UUID=00a59b75-c03e-434e-bb57-6f16a92634f5 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5242240 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1018008k/1048512k available (4566k kernel code, 29588k reserved, 2142k data, 540k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3087.491 MHz processor.
[ 0.001320] Console: colour VGA+ 80x25
[ 0.001325] console [tty0] enabled
[ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 6174.98 BogoMIPS (lpj=12349964)
[ 0.004053] Security Framework initialized
[ 0.004089] AppArmor: AppArmor initialized
[ 0.004099] Mount-cache hash table entries: 512
[ 0.004323] Initializing cgroup subsys ns
[ 0.004331] Initializing cgroup subsys cpuacct
[ 0.004336] Initializing cgroup subsys memory
[ 0.004346] Initializing cgroup subsys freezer
[ 0.004349] Initializing cgroup subsys net_cls
[ 0.004373] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004378] CPU: L2 cache: 512K
[ 0.004381] CPU: Physical Processor ID: 0
[ 0.004384] CPU: Processor Core ID: 0
[ 0.004389] mce: CPU supports 4 MCE banks
[ 0.004402] CPU0: Thermal monitoring enabled (TM1)
[ 0.004420] Performance Counters: no PMU driver, software counters only.
[ 0.004429] Checking 'hlt' instruction... OK.
[ 0.023213] ACPI: Core revision 20090521
[ 0.033897] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073587] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6175.14 BogoMIPS (lpj=12350296)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.161072] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
[ 0.161098] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164058] Brought up 2 CPUs
[ 0.164064] Total of 2 processors activated (12350.13 BogoMIPS).
[ 0.164107] CPU0 attaching sched-domain:
[ 0.164111] domain 0: span 0-1 level SIBLING
[ 0.164115] groups: 0 1
[ 0.164123] CPU1 attaching sched-domain:
[ 0.164127] domain 0: span 0-1 level SIBLING
[ 0.164131] groups: 1 0
[ 0.164257] Booting paravirtualized kernel on bare hardware
[ 0.164283] regulator: core version 0.5
[ 0.164283] Time: 13:20:35 Date: 11/26/09
[ 0.164283] NET: Registered protocol family 16
[ 0.164308] EISA bus registered
[ 0.164325] ACPI: bus type pci registered
[ 0.203741] PCI: PCI BIOS revision 2.10 entry at 0xfb4d0, last bus=1
[ 0.203744] PCI: Using configuration type 1 for base access
[ 0.205198] bio: create slab <bio-0> at 0
[ 0.205198] ACPI: EC: Look up EC in DSDT
[ 0.212773] ACPI: Interpreter enabled
[ 0.212781] ACPI: (supports S0 S3 S4 S5)
[ 0.212811] ACPI: Using IOAPIC for interrupt routing
[ 0.218395] ACPI: No dock devices found.
[ 0.218525] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.218591] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff]
[ 0.218798] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
[ 0.218807] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
[ 0.218815] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
[ 0.218824] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
[ 0.218833] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f]
[ 0.218868] pci 0000:00:02.5: PME# supported from D3cold
[ 0.218874] pci 0000:00:02.5: PME# disabled
[ 0.218905] pci 0000:00:03.0: reg 10 32bit mmio: [0xee00b000-0xee00bfff]
[ 0.218969] pci 0000:00:03.1: reg 10 32bit mmio: [0xee008000-0xee008fff]
[ 0.219033] pci 0000:00:03.2: reg 10 32bit mmio: [0xee009000-0xee009fff]
[ 0.219118] pci 0000:00:05.0: reg 10 io port: [0xd000-0xd007]
[ 0.219127] pci 0000:00:05.0: reg 14 io port: [0xd400-0xd403]
[ 0.219135] pci 0000:00:05.0: reg 18 io port: [0xd800-0xd807]
[ 0.219143] pci 0000:00:05.0: reg 1c io port: [0xdc00-0xdc03]
[ 0.219152] pci 0000:00:05.0: reg 20 io port: [0xe000-0xe00f]
[ 0.219186] pci 0000:00:05.0: PME# supported from D3cold
[ 0.219191] pci 0000:00:05.0: PME# disabled
[ 0.219240] pci 0000:00:0a.0: reg 10 32bit mmio: [0xee000000-0xee007fff]
[ 0.219339] pci 0000:00:0d.0: reg 10 32bit mmio: [0xee00c000-0xee00c7ff]
[ 0.219349] pci 0000:00:0d.0: reg 14 io port: [0xe400-0xe47f]
[ 0.219401] pci 0000:00:0d.0: supports D2
[ 0.219403] pci 0000:00:0d.0: PME# supported from D2 D3hot D3cold
[ 0.219409] pci 0000:00:0d.0: PME# disabled
[ 0.219450] pci 0000:00:0e.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.219459] pci 0000:00:0e.0: reg 14 32bit mmio: [0xee00d000-0xee00d0ff]
[ 0.219510] pci 0000:00:0e.0: supports D1 D2
[ 0.219513] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
[ 0.219518] pci 0000:00:0e.0: PME# disabled
[ 0.219596] pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff]
[ 0.219604] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xe7ffffff]
[ 0.219630] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.219705] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff]
[ 0.219711] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.219722] pci_bus 0000:00: on NUMA node 0
[ 0.219728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.239932] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.240072] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.240196] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.240320] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 0.240446] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.240577] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.240705] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.240831] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.241119] SCSI subsystem initialized
[ 0.241207] libata version 3.00 loaded.
[ 0.241207] usbcore: registered new interface driver usbfs
[ 0.241207] usbcore: registered new interface driver hub
[ 0.241207] usbcore: registered new device driver usb
[ 0.241207] ACPI: WMI: Mapper loaded
[ 0.241207] PCI: Using ACPI for IRQ routing
[ 0.252015] Bluetooth: Core ver 2.15
[ 0.252048] NET: Registered protocol family 31
[ 0.252048] Bluetooth: HCI device and connection manager initialized
[ 0.252048] Bluetooth: HCI socket layer initialized
[ 0.252048] NetLabel: Initializing
[ 0.252048] NetLabel: domain hash size = 128
[ 0.252048] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.252055] NetLabel: unlabeled traffic allowed by default
[ 0.264022] pnp: PnP ACPI init
[ 0.264063] ACPI: bus type pnp registered
[ 0.267827] pnp: PnP ACPI: found 12 devices
[ 0.267832] ACPI: ACPI bus type pnp unregistered
[ 0.267838] PnPBIOS: Disabled by ACPI PNP
[ 0.267855] system 00:00: iomem range 0xcf400-0xcffff has been reserved
[ 0.267859] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.267864] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.267867] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.267871] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 0.267875] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.267879] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.267882] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.267886] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.267890] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
[ 0.267894] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.267897] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.267908] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.267912] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.267916] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.302675] AppArmor: AppArmor Filesystem Enabled
[ 0.302713] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.302716] pci 0000:00:01.0: IO window: disabled
[ 0.302724] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff
[ 0.302730] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
[ 0.302749] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.302752] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.302755] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff]
[ 0.302759] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.302818] NET: Registered protocol family 2
[ 0.302961] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.303487] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304626] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305328] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.305335] TCP reno registered
[ 0.305558] NET: Registered protocol family 1
[ 0.305690] Trying to unpack rootfs image as initramfs...
[ 0.533017] Freeing initrd memory: 7469k freed
[ 0.544147] cpufreq-nforce2: No nForce2 chipset.
[ 0.544189] Scanning for low memory corruption every 60 seconds
[ 0.544356] audit: initializing netlink socket (disabled)
[ 0.544385] type=2000 audit(1259241635.543:1): initialized
[ 0.552124] highmem bounce pool size: 64 pages
[ 0.552134] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.554053] VFS: Disk quotas dquot_6.5.2
[ 0.554146] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.554904] fuse init (API version 7.12)
[ 0.555011] msgmni has been set to 1731
[ 0.555365] alg: No test for stdrng (krng)
[ 0.555389] io scheduler noop registered
[ 0.555392] io scheduler anticipatory registered
[ 0.555395] io scheduler deadline registered
[ 0.555463] io scheduler cfq registered (default)
[ 0.555539] pci 0000:01:00.0: Boot video device
[ 0.555654] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.555688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.555887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.555893] ACPI: Power Button [PWRF]
[ 0.555960] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.555963] ACPI: Power Button [PWRB]
[ 0.556054] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.556061] ACPI: Sleep Button [FUTS]
[ 0.556138] fan PNP0C0B:00: registered as cooling_device0
[ 0.556146] ACPI: Fan [FAN] (on)
[ 0.556475] processor LNXCPU:00: registered as cooling_device1
[ 0.556530] processor LNXCPU:01: registered as cooling_device2
[ 0.559167] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.559179] ACPI: Thermal Zone [THRM] (40 C)
[ 0.559266] isapnp: Scanning for PnP cards...
[ 0.801147] Switched to high resolution mode on CPU 1
[ 0.804003] Switched to high resolution mode on CPU 0
[ 0.912828] isapnp: No Plug & Play device found
[ 0.914372] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.914495] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.914597] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.914941] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.915087] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.916490] brd: module loaded
[ 0.917136] loop: module loaded
[ 0.917260] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.917520] sata_sis 0000:00:05.0: version 1.0
[ 0.917549] alloc irq_desc for 17 on node -1
[ 0.917553] alloc kstat_irqs on node -1
[ 0.917564] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.917572] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 0.917773] scsi0 : sata_sis
[ 0.917934] scsi1 : sata_sis
[ 0.918001] ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 17
[ 0.918009] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 17
[ 0.918609] pata_sis 0000:00:02.5: version 0.5.2
[ 0.918626] alloc irq_desc for 16 on node -1
[ 0.918629] alloc kstat_irqs on node -1
[ 0.918636] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.918874] scsi2 : pata_sis
[ 0.919001] scsi3 : pata_sis
[ 0.920073] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 0.920077] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 0.920573] Fixed MDIO Bus: probed
[ 0.920625] PPP generic driver version 2.4.2
[ 0.920798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.920826] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.920855] alloc irq_desc for 20 on node -1
[ 0.920858] alloc kstat_irqs on node -1
[ 0.920867] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.920891] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.920975] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 0.921019] ohci_hcd 0000:00:03.0: irq 20, io mem 0xee00b000
[ 0.978118] usb usb1: configuration #1 chosen from 1 choice
[ 0.978161] hub 1-0:1.0: USB hub found
[ 0.978177] hub 1-0:1.0: 3 ports detected
[ 0.978258] alloc irq_desc for 21 on node -1
[ 0.978262] alloc kstat_irqs on node -1
[ 0.978269] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.978285] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.978344] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 0.978377] ohci_hcd 0000:00:03.1: irq 21, io mem 0xee008000
[ 1.034083] usb usb2: configuration #1 chosen from 1 choice
[ 1.034119] hub 2-0:1.0: USB hub found
[ 1.034133] hub 2-0:1.0: 3 ports detected
[ 1.034200] alloc irq_desc for 22 on node -1
[ 1.034203] alloc kstat_irqs on node -1
[ 1.034209] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.034222] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 1.034266] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 1.034295] ohci_hcd 0000:00:03.2: irq 22, io mem 0xee009000
[ 1.084468] ata3.00: ATA-7: SAMSUNG SP0802N, TK100-24, max UDMA/100
[ 1.084472] ata3.00: 156368016 sectors, multi 1: LBA48
[ 1.090089] usb usb3: configuration #1 chosen from 1 choice
[ 1.090128] hub 3-0:1.0: USB hub found
[ 1.090142] hub 3-0:1.0: 2 ports detected
[ 1.090224] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.090365] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.090368] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.090483] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.090605] mice: PS/2 mouse device common for all mice
[ 1.090769] rtc_cmos 00:04: RTC can wake from S4
[ 1.090828] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.090854] rtc0: alarms up to one year, 242 bytes nvram
[ 1.090994] device-mapper: uevent: version 1.0.3
[ 1.091160] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.091293] device-mapper: multipath: version 1.1.0 loaded
[ 1.091299] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.091490] EISA: Probing bus 0 at eisa.0
[ 1.091500] Cannot allocate resource for EISA slot 1
[ 1.091511] Cannot allocate resource for EISA slot 4
[ 1.091530] EISA: Detected 0 cards.
[ 1.091685] cpuidle: using governor ladder
[ 1.091691] cpuidle: using governor menu
[ 1.092483] TCP cubic registered
[ 1.092653] NET: Registered protocol family 10
[ 1.093322] lo: Disabled Privacy Extensions
[ 1.093829] NET: Registered protocol family 17
[ 1.093871] Bluetooth: L2CAP ver 2.13
[ 1.093874] Bluetooth: L2CAP socket layer initialized
[ 1.093878] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.093880] Bluetooth: SCO socket layer initialized
[ 1.093973] Bluetooth: RFCOMM TTY layer initialized
[ 1.093981] Bluetooth: RFCOMM socket layer initialized
[ 1.093985] Bluetooth: RFCOMM ver 1.11
[ 1.094099] Using IPI No-Shortcut mode
[ 1.094264] PM: Resume from disk failed.
[ 1.094296] registered taskstats version 1
[ 1.094468] Magic number: 1:634:332
[ 1.094482] ata3.00: configured for UDMA/100
[ 1.094524] tty tty53: hash matches
[ 1.094601] rtc_cmos 00:04: setting system clock to 2009-11-26 13:20:36 UTC (1259241636)
[ 1.094606] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.094608] EDD information not available.
[ 1.112659] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.247744] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.408015] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 1.574753] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.574933] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP0802N TK10 PQ: 0 ANSI: 5
[ 1.575150] sd 2:0:0:0: [sda] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.575172] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.575260] sd 2:0:0:0: [sda] Write Protect is off
[ 1.575268] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.575308] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.575527] sda: sda1 sda2 < sda5
[ 1.611158] usb 2-2: configuration #1 chosen from 1 choice
[ 1.613033] sda6 >
[ 1.613472] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.736791] ata4.00: ATAPI: JLMS XJ-HD166S, DS18, max UDMA/33
[ 1.736830] ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A300, max UDMA/33
[ 1.737470] ata4.00: configured for UDMA/33
[ 1.752378] ata4.01: configured for UDMA/33
[ 1.755198] scsi 3:0:0:0: CD-ROM JLMS XJ-HD166S DS18 PQ: 0 ANSI: 5
[ 1.756781] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.756787] Uniform CD-ROM driver Revision: 3.20
[ 1.756935] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.757021] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.762051] scsi 3:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A300 PQ: 0 ANSI: 5
[ 1.775237] sr1: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.775367] sr 3:0:1:0: Attached scsi CD-ROM sr1
[ 1.775432] sr 3:0:1:0: Attached scsi generic sg2 type 5
[ 1.775476] Freeing unused kernel memory: 540k freed
[ 1.776303] Write protecting the kernel text: 4568k
[ 1.776368] Write protecting the kernel read-only data: 1836k
[ 1.952944] Linux agpgart interface v0.103
[ 1.958955] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 1.965319] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 1.990327] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.990410] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.996878] 8139too Fast Ethernet driver 0.9.28
[ 1.997137] alloc irq_desc for 18 on node -1
[ 1.997146] alloc kstat_irqs on node -1
[ 1.997165] 8139too 0000:00:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.999456] eth0: RealTek RTL8139 at 0xe800, 00:0d:87:5b:b9:0f, IRQ 18
[ 2.099187] usbcore: registered new interface driver hiddev
[ 2.105143] input: HID 062a:0001 as /devices/pci0000:00/0000:00:03.1/usb2/2-2/2-2:1.0/input/input5
[ 2.105316] generic-usb 0003:062A:0001.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:03.1-2/input0
[ 2.105359] usbcore: registered new interface driver usbhid
[ 2.105365] usbhid: v2.6:USB HID core driver
[ 2.106290] ohci1394 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.167090] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[ee00c000-ee00c7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.173633] FDC 0 is a post-1991 82077
[ 3.261146] PM: Starting manual resume from disk
[ 3.261152] PM: Resume from partition 8:5
[ 3.261154] PM: Checking hibernation image.
[ 3.261409] PM: Resume from disk failed.
[ 3.282305] EXT4-fs (sda1): barriers enabled
[ 3.294932] kjournald2 starting: pid 353, dev sda1:8, commit interval 5 seconds
[ 3.294956] EXT4-fs (sda1): delayed allocation enabled
[ 3.294963] EXT4-fs: file extents enabled
[ 3.296465] EXT4-fs: mballoc enabled
[ 3.296488] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.448279] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ff0e007e]
[ 3.965237] type=1505 audit(1259241639.369:2): operation="profile_load" pid=376 name=/usr/share/gdm/guest-session/Xsession
[ 3.969118] type=1505 audit(1259241639.373:3): operation="profile_load" pid=377 name=/sbin/dhclient3
[ 3.969660] type=1505 audit(1259241639.373:4): operation="profile_load" pid=377 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.969957] type=1505 audit(1259241639.373:5): operation="profile_load" pid=377 name=/usr/lib/connman/scripts/dhclient-script
[ 4.019559] type=1505 audit(1259241639.421:6): operation="profile_load" pid=378 name=/usr/bin/evince
[ 4.028997] type=1505 audit(1259241639.433:7): operation="profile_load" pid=378 name=/usr/bin/evince-previewer
[ 4.034489] type=1505 audit(1259241639.437:8): operation="profile_load" pid=378 name=/usr/bin/evince-thumbnailer
[ 4.055628] type=1505 audit(1259241639.457:9): operation="profile_load" pid=380 name=/usr/lib/cups/backend/cups-pdf
[ 4.056321] type=1505 audit(1259241639.461:10): operation="profile_load" pid=380 name=/usr/sbin/cupsd
[ 13.310476] Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k
[ 13.317084] udev: starting version 147
[ 13.396666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.402111] lp: driver loaded but no devices found
[ 13.648555] cfg80211: Calling CRDA to update world regulatory domain
[ 13.738159] nvidia: module license 'NVIDIA' taints kernel.
[ 13.738168] Disabling lock debugging due to kernel taint
[ 13.764655] EXT4-fs (sda1): internal journal on sda1:8
[ 13.786306] cfg80211: World regulatory domain updated:
[ 13.786312] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.786318] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.786322] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.786326] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.786331] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.786335] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.834155] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.848700] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.848784] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 13.944334] lp0: using parport0 (interrupt-driven).
[ 13.980025] ppdev: user-space parallel port driver
[ 14.023885] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.024335] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 14.040597] rt61pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.062279] phy0: Selected rate control algorithm 'minstrel'
[ 14.063769] Registered led device: rt61pci-phy0::radio
[ 14.063809] Registered led device: rt61pci-phy0::assoc
[ 14.432843] EXT4-fs (sda6): barriers enabled
[ 14.449705] kjournald2 starting: pid 675, dev sda6:8, commit interval 5 seconds
[ 14.449914] EXT4-fs (sda6): internal journal on sda6:8
[ 14.449920] EXT4-fs (sda6): delayed allocation enabled
[ 14.449925] EXT4-fs: file extents enabled
[ 14.458387] EXT4-fs: mballoc enabled
[ 14.458418] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 14.677836] rt61pci 0000:00:0a.0: firmware: requesting rt2561.bin
[ 14.829331] __ratelimit: 3 callbacks suppressed
[ 14.829336] type=1505 audit(1259241650.233:12): operation="profile_replace" pid=828 name=/usr/share/gdm/guest-session/Xsession
[ 14.833194] type=1505 audit(1259241650.237:13): operation="profile_replace" pid=829 name=/sbin/dhclient3
[ 14.833891] type=1505 audit(1259241650.237:14): operation="profile_replace" pid=829 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.834192] type=1505 audit(1259241650.237:15): operation="profile_replace" pid=829 name=/usr/lib/connman/scripts/dhclient-script
[ 14.842133] type=1505 audit(1259241650.245:16): operation="profile_replace" pid=830 name=/usr/bin/evince
[ 14.851989] type=1505 audit(1259241650.253:17): operation="profile_replace" pid=830 name=/usr/bin/evince-previewer
[ 14.852749] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.855601] eth0: link down
[ 14.855846] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.860408] type=1505 audit(1259241650.265:18): operation="profile_replace" pid=830 name=/usr/bin/evince-thumbnailer
[ 14.871090] type=1505 audit(1259241650.273:19): operation="profile_replace" pid=833 name=/usr/lib/cups/backend/cups-pdf
[ 14.871732] type=1505 audit(1259241650.273:20): operation="profile_replace" pid=833 name=/usr/sbin/cupsd
[ 14.876120] type=1505 audit(1259241650.281:21): operation="profile_replace" pid=834 name=/usr/sbin/tcpdump
[ 15.974846] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[ 15.974892] agpgart-sis 0000:00:00.0: putting AGP V3 device into 8x mode
[ 15.975880] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 16.757106] CPU0 attaching NULL sched-domain.
[ 16.757117] CPU1 attaching NULL sched-domain.
[ 16.773101] CPU0 attaching sched-domain:
[ 16.773108] domain 0: span 0-1 level SIBLING
[ 16.773112] groups: 0 1
[ 16.773119] domain 1: span 0-1 level MC
[ 16.773123] groups: 0-1 (__cpu_power = 2048)
[ 16.773133] CPU1 attaching sched-domain:
[ 16.773135] domain 0: span 0-1 level SIBLING
[ 16.773139] groups: 1 0
[ 16.773144] domain 1: span 0-1 level MC
[ 16.773148] groups: 0-1 (__cpu_power = 2048)
[ 18.071563] CPU0 attaching NULL sched-domain.
[ 18.071575] CPU1 attaching NULL sched-domain.
[ 18.084474] CPU0 attaching sched-domain:
[ 18.084480] domain 0: span 0-1 level SIBLING
[ 18.084485] groups: 0 1
[ 18.084495] CPU1 attaching sched-domain:
[ 18.084498] domain 0: span 0-1 level SIBLING
[ 18.084501] groups: 1 0
[ 144.792416] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 144.792586] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 153.284404] eth0: link down
[ 154.860361] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 155.440045] eth0: no IPv6 routers present
[ 155.552617] eth0: link down
[ 157.482216] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11)
Subsystem: Elitegroup Computer Systems Device 1b10
Flags: bus master, medium devsel, latency 32
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Kernel modules: shpchp
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
Flags: bus master, medium devsel, latency 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems Device 1b10
Flags: bus master, medium devsel, latency 128, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 4000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_sis
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device 1b10
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at ee00b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device 1b10
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at ee008000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device 1b10
Flags: bus master, medium devsel, latency 32, IRQ 22
Memory at ee009000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:05.0 IDE interface: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] (rev 01) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems Device 1b10
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
I/O ports at d000 [size=8]
I/O ports at d400 [size=4]
I/O ports at d800 [size=8]
I/O ports at dc00 [size=4]
I/O ports at e000 [size=16]
I/O ports at <unassigned>
Capabilities: <access denied>
Kernel driver in use: sata_sis
00:0a.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
Subsystem: Device 1948:3c24
Flags: bus master, slow devsel, latency 32, IRQ 18
Memory at ee000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci
Kernel modules: rt61pci
00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 80) (prog-if 10)
Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at ee00c000 (32-bit, non-prefetchable) [size=2K]
I/O ports at e400 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Elitegroup Computer Systems Device 1b10
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at e800 [size=256]
Memory at ee00d000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: epl, 8139too, 8139cp
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 9110
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at ed000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
