Buenas,
Tengo un
XP1800
EPOX 3ka+
y temperaturas que oscilan entre los 60 - 65 ºC
mi disipador:
Marca fanner
Socket A / 370 Cooling kit
Dimensions Heat sink : 12VDC Fan : 74×74×47 mm (l × w × h)80×80×25mm
Bearing Two Ball bearing
Rated speed 2500 RPM +/-10%
Rated power 1.56 W
Noise level 26.5 dBA
Air flow 31.70 CFM at 2500 RPM
Current 0.13 A
Life hours Two Ball: 70.000
Connector 3 Pin, mainboard
Application Intel : Pentium III ~ 1,4 GHz (FC-PGA2)
Pentium III ~ 1,13 GHz (FC-PGA)
Celeron ~ 1,8 GHz (PPGA)
AMD : Athlon XP ~ 2200+ (Thoroughbred)
Athlon XP ~ 2100+ (Palomino)
Athlon ~ 1,4 GHz (Thunderbird)
Duron ~ 1,3 GHz (Morgan)
Thermal resistance 0.48 °C/W
Thermal type White grease
La pasta termica que utilice
arctic alumina
Thermal conductivity: >4.0 W/m°K (Hot Wire Method Per MIL-C-47113)
Thermal Resistance: <0.009°C-in²/Watt (0.001 inch layer)
Extended temperature limits: – 40°C to >180°C
2 to 10 degrees centigrade lower CPU core temperatures than standard thermal compounds or thermal pads
Me aconsejais otro disipador? , notare la diferencia?
Esta temperatura es muy alta o perjudicial para la cpu?
Saludos y gracias