(SOLUCIONADO)perdido con 4.0E y chip

GRACIAS A TOD@S.ESTA ES LA SOLUCION:(si no se puede poner asi de directo algun moderador que lo borrre)

This is a copy of a story I found on a couple of other sites. I can tell you that this fix worked 100% for me. I personally performed the fix on a Wii that had been udpated to 4.0 via Wifi from Nintendo. Luckily this wii did have the HBC already loaded, however no custom IOS was in place.

I am a member of so many boards I can't remember which have rules on links and which don't. I apologize in advance if the mod needs to remove the links I am providing below. If you need to find the files, google search on CMDVDX34.

paste of story below with my comments:

YOU NEED HBC AT LEAST INSTALLED!!!
BACKUP YOUR SD CARD ON YOUR PC
DELETE EVERYTHING ON YOUR SD CARD OR THIS WILL NEVER WORK

[weswii edit - I just formatted an extra card. You need to make sure you have no other wads or other possibly pirated stuff on the card as the installer will search. See bottom of this story if you didn't follow these instructions.]

Download http://www.yafaze.com/wii/files/4.0NoCIOSfix.rar

Put the contents on your SD Card as it is in the .rar just drag all to SD Card.

Follow these instructions:


1.Run CMDVDX34 using HBC (this patches IOS35 to a lower number)
[weswii edit - there are 3 parts to this app, I ran all of them in order specified. I thought it wasn't working since the first one locked up my wii after I ran it and I had to power the wii off manually. The second one did the same thing, but the patch did work.]

2.Install IOS35.wad using Wad Manager (any version) (if it fails, it's already installed, don't worry continue)
[weswii edit - I used the IOS35 version since it was already there for the next step]

3.Then run Wad Manager (IOS35 Version) and install the CIOS7.wad
[weswii edit - this failed the first time I ran it with a -2011 error so I thought I was dead. However, reset the wii and tried a second time and was successful]

Booyah!! Done.

Now you can run the CIOSrev9(or 10)update and start enjoying wii again.


If you get a piracy message run this
[weswii edit - then you didn't pay attention when I said to remove everything off the card except the files from the .rar file you downloaded!]



Comex's DVDx installer- CMDVDX34- has a built in "piracy check". It scans the SD card for things like pirated wads and backup loaders. If it finds them, the installer fails with the message It seems to me you are a pirate (press the home key to exit). The installer stores a record of the failure in the Wii's NAND. There is (EDIT) now a way to erase this record, so if you fail the check the first time then you aren't totally screwed. But unless the tag is removed CMDVDX34 will not run; it will only display the piracy message and then exit.

CMDVDX34 isn't likely to scan already installed channels/wads. Just use a clean SD card and you should be fine. If you still have problems, even after using a Clean SD, you may need to uninstall your pirated games - this has yet to be confirmed.




++++++++++++++++++++++++++++++++++++++++++++++++++



Hola por historias de la vida actualice a 4.0E...despues de mucho buscar encontre lo del banner bomb ese y ya tengo el HBC, pero ahora quiero instalar el usbloader y claro necesito un cIOS 34,36..en fin ninguno de los que intento me deja.
Posiblemente la solucion mas facil es hacer un downgrade , pero me gustaria si algun alma amable me explicara si se puede como hacerlo tal cual en 4.0E
al intenta instalarlo por wifi me dice:

Installing ticket ... ERROR! (ret = -2011)

luego encontre esto:
Sigue estos pasos:

Error –2011 Solución a 3.4E

Paso 1 - Descargo este archivo del siguiente enlace:
**********************
cOPIAR el contenido en la raiz de la sd.

Paso 2 - Utilizar el "Canal Homebrew ', abrir' WAD Manager 3 '.

Paso 3 - Instalo el siguiente Wad IOS16-64-v257-prod.wad. Pulse el botón + para instalar el WAD. Una vez que ha instalado el WAD, pulso el 'Inicio' botón para reiniciar el Wii.

Paso 4 - Usando el 'Canal Homebrew', abrir Custom WadManager (WM) ». Ahora, utilizando el mismo método que en "Paso 3 ', instale el' cios_fix.wad». Una vez que ha instalado el WAD, pulse el 'Inicio' botón para reiniciar el Wii.

Despues de ésto sigo los pasos del tutorial para instalar el cIOS Rev9 .... Y POR FIN SE DEJA!

Un saludo.

******************

pero el 3 paso, me pone: gracias

Intalling title .... ERROR! (ret = -1035)

alguna idea ...
Echale un ojo a esto, me parece que este compañero estaba con tu mismo problema. Al final lo soluciono.
Aqui tienes el enlace:
http://www.elotrolado.net/hilo_a-ver-si-os-enterais_1249386
No se si te servira. Por cierto como iras viendo en el hilo, ya esta cerrado, asi que no podras escribir alli.

Suerte, un saludo.

PD: Consejo, las dudas que tengas con respecto a un determinado proceso o tutorial, deberias postearlas en el mismo hilo del tutorial, ya que es donde mejor te deberian poder solucionar el problema.
el hilo en cuestión lo he limpiado, para dejarlo como tema abierto, por que al parecer es un tema que se está repitiendo.
de paso, le he cambiado el título a uno mas coherente.

hilo_error-1035-al-intentar-instalar-wad-del-cios_1250492#p1716342285
Para instalar cualquier cosa NO firmada por nintendo necesitas cIOS o trucha...

Lógicamente si lo que quieres es instalar cIOS es porque no lo tienes y en 4.0 NO hay trucha.

Tenéis un tutorial para instalar cIOS en 4.0.




Por favor leed un poco antes de postear.
3 respuestas