[Solucionado]Problema con samba. Haber si alguien me orienta.

Archivado
Buenas, uso como sistema principal Gnu/Linux Mint 17.3 y hasta hace unas semanas me funcionaba samba perfectamente, pero llevo unos días que no hay manera de conectar con el móvil.
Lo único que ha cambiado creo, es que antes usaba el kernel 4.2 y ahora el 4.4. ¿Creéis que puede ser por el kernel por lo que no me funcione?, los servicios están ejecutándose bien(mirando en el monitor del sistema), pero el móvil siempre me dice que no se puede conectar al servidor, cosa que antes poniendo la ip de mi pc ya conectaba a las carpetas compartidas por samba. Gracias y siento el coñazo, espero alguién me ilustre( leería y leería, pero por fin he conseguido trabajo y tengo el tiempo muy escaso).
jlljmansilla escribió:Buenas, uso como sistema principal Gnu/Linux Mint 17.3 y hasta hace unas semanas me funcionaba samba perfectamente, pero llevo unos días que no hay manera de conectar con el móvil.
Lo único que ha cambiado creo, es que antes usaba el kernel 4.2 y ahora el 4.4. ¿Creéis que puede ser por el kernel por lo que no me funcione?, los servicios están ejecutándose bien(mirando en el monitor del sistema), pero el móvil siempre me dice que no se puede conectar al servidor, cosa que antes poniendo la ip de mi pc ya conectaba a las carpetas compartidas por samba. Gracias y siento el coñazo, espero alguién me ilustre( leería y leería, pero por fin he conseguido trabajo y tengo el tiempo muy escaso).


Hay muchos datos que no das y alguna que otra cosa que no termino de entender. Llevo mucho usando Mint y compartiendo por samba sin ningún tipo de problema, de hecho acabo de hacer la prueba desde el móvil y conecta sin problemas a un Mint con el kernel 4.4
Tendrías que dar más detalles. Con lo que dices hay más probabilidades de que te estés conectando mal desde el móvil (tal vez con los datos activados habiéndote olvidado de activar el wifi) o que tengas la red mal configurada que un fallo de samba.
Puedes hacer ping desde el móvil? Has cambiado el router? Los de orange dan problemas por ejemplo, aunque tengas la red perfectamente montada...
Y para terminar...para qué has metido ese kernel? Mint 17.3 trae uno bastante anterior de serie que va de maravilla, el 4.4 se usa para cosas muy específicas, tenías hardware que daba fallos? Puede ser parte del problema...
los logs que dicen? yo no tengo problemas con samba sobre 4.4.5
Otra comprobación es ver si te puedes conectar de otra forma (por ejemplo ssh) para descartar completamente que sea samba lo que está fallando, no das casi datos y puede haber varios problemas antes de llegar a samba
Gracias a todos por responder, no doy mas datos, porque por un lado no se que mas datos dar, y por otro , como os digo, llevo usando samba desde hace un año sin problemas, pero llevo unos días que no conecta por samba. Conectarme mal por el móvil, lo dudo, porque llevo conectando desde el principio con esexplorer por lan con samba sin problemas.
Lo único que ha cambiado es el kernel, y no recuerdo bien si hace poco también se actualizó samba.
El archivo de configuración esta bien, de hecho he restaurado un backup que tenía hecho por si acaso, y sigo sin conseguir conectar.
El tener ese kernel, es porque una vez leí que los juegos con wine ivan mejor con 4.2, y lo cambie, y de vez en cuando lo cambio al último( me encanta trastear, ya que por experiencia aprendo de los errores que cometo , no de lo que hago bien).
Voy a probar a arrancar desde un kernel 3.19 que tengo instalado, haber si hace lo mismo.
Sigues sin decir exactamente qué es lo que te pasa y qué has hecho para comprobarlo. Te puedo decir al 100% que no es por tener el kernel 4.4, escribo esto desde un móvil desde el que estoy accediendo por red a un Mint 17.3 con ese kernel. Actualizaciones de samba tampoco, seguro.

Mensajes de error por algún lado?
La configuración de red está bien? Ips bien colocadas y demás
Has probado la red por ssh por ejemplo para descartar otros problemas?

No dices qué has hecho para comprobar que es samba lo que falla ni el mensaje (samba siempre genera mensaje de error cuando algo falla). Pasa los logs de samba para ver qué está pasando, sigues exponiendo el problema de forma tan genérica que es complicadísimo ayudarte.
a mi hace unos meses al ponerme la nueva debian 8 me dejo de funcionar samba tal y como lo tenia configurado en debian 7.

para conectarme ademas desde otro linux tuve que añadir un parametro al comando de montado de samba.

te dejo aqui el post actualizado de cuando lo hice
http://www.driverlandia.com/en/instalar ... ux-debian/
verdezito escribió:Sigues sin decir exactamente qué es lo que te pasa y qué has hecho para comprobarlo. Te puedo decir al 100% que no es por tener el kernel 4.4, escribo esto desde un móvil desde el que estoy accediendo por red a un Mint 17.3 con ese kernel. Actualizaciones de samba tampoco, seguro.

Mensajes de error por algún lado?
La configuración de red está bien? Ips bien colocadas y demás
Has probado la red por ssh por ejemplo para descartar otros problemas?

No dices qué has hecho para comprobar que es samba lo que falla ni el mensaje (samba siempre genera mensaje de error cuando algo falla). Pasa los logs de samba para ver qué está pasando, sigues exponiendo el problema de forma tan genérica que es complicadísimo ayudarte.

Pues en el pc nada, pero con los móviles no consigo conectarme a la carpeta compartida Descargar. Probar pues solo he probado varios móviles, ya que samba se esta ejecutando perfectamente en el pc, ¿que mas puedo probar?, ssh no lo he usado nunca, tendre que informame como va, por ftp conecta bien( es lo unico que he probado, ademas de con un kernel anterior, y tienes razón no es problema del kernel).
En el movil voy a la app esexplorer, abro la lan y le doy a nuevo, y conecto a la dirección de mi pc, que es 192.168.1.137(antes lo miro en el administrador de red) con 192.168.1.136 conecto al portatil que tiene win7( y conecta bien)
Mensajes de error solo me da el móvil, que dice servidor no encontrado.
la configuración de red esta bien( conecto por cable de red) lps( no se lo que es)
Y como te digo ssh no lo he probado( me informare y probare), gracias por responderme.

sodark escribió:a mi hace unos meses al ponerme la nueva debian 8 me dejo de funcionar samba tal y como lo tenia configurado en debian 7.

para conectarme ademas desde otro linux tuve que añadir un parametro al comando de montado de samba.

te dejo aqui el post actualizado de cuando lo hice
http://www.driverlandia.com/en/instalar ... ux-debian/

Gracias voy a probar a ver.
Edito: No consigo hacerlo funcionar. Este es mi archivo de configuración , por si creéis que tengo algo mal.
Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = REDJLLJ

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Linux Mint)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
;   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user
   security = share

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes
   username map = /etc/samba/smbusers
;   encrypt passwords = yes
;   guest ok = no
;   guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
;   guest ok = no
;   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
;   browseable = yes
;   read only = yes
;   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

[Descargas]
   path = /home/anonimo/Descargas
   writeable = yes
;   browseable = yes
   guest ok = yes
   security = share
   case sensitive = no
   comment = Carpeta pública
[Música]
   path = /home/anonimo/Música
   writeable = yes

   security = share



   case sensitive = no

   comment = Carpeta publica accesible desde Web

   guest ok = yes

;   browseable = yes

has mirado si al encender el samba como servicio se inicia correctamente?

sudo service samba status
o
sudo service smbd status
En *nix tienes un directorio /var/log majisimo lleno de logs del sistema, que como te dije antes es de donde tienes que empezar a investigar en vez de estar probando a ciegas. Que error da samba al iniciar/intentar conectar desde el movil?
Siento el retraso, esto es lo que sale en terminal
anonimo@jlljmansilla-All-Series ~ $ sudo service smbd status
smbd start/running, process 881
Estos son los log de hoy:

log.smbd
[2016/04/04 15:25:15.420550,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/05 14:21:04,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 14:21:04.373465,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/05 14:21:04.413267,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/05 14:21:04.413372,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/05 15:24:32.311722,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/05 21:04:26,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 21:04:26.609664,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/05 21:04:26.648629,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/05 21:04:26.648724,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/05 21:04:38.044791,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/05 21:04:38.044848,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/05 21:04:38.367478,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/05 21:04:38.367535,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/05 21:04:38.519035,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/05 21:04:38.519090,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/05 21:04:45.750276,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/05 21:04:45.750340,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/05 21:44:04.442180,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/05 21:44:47,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 21:44:47.348429,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/05 21:44:47.387372,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/05 21:44:47.387490,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/05 21:52:45.987066,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/05 21:54:17,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 21:54:17.768917,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/05 22:03:54.603029,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/05 22:03:54,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 22:03:54.614190,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/05 23:25:37.291610,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 14:09:30,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 14:09:30.627224,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 14:09:30.678335,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 14:09:30.678450,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 14:35:08.280234,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 14:35:50,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 14:35:50.566780,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 14:35:50.597672,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 14:35:50.597767,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 14:50:00.530701,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 14:50:00,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 14:50:00.539562,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 14:50:40.398844,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 14:50:40,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 14:50:40.409605,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 15:20:02.525788,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 21:31:49,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:31:49.513339,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 21:31:49.548413,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 21:31:49.548506,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 21:32:01.055777,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 21:32:01.055840,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 21:32:01.243180,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 21:32:01.243238,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 21:32:08.177009,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 21:32:08.177078,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 21:46:18.855811,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 21:47:21,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:47:21.299712,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 21:47:21.311551,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 21:47:21.311655,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 21:49:21,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:49:21.450918,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 21:49:21.466820,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 21:49:21.466930,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 21:51:53,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:51:54.016829,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 21:51:54.028311,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 21:51:54.028719,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 22:00:16.574225,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 22:01:42,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 22:01:42.541812,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 22:01:42.576907,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/06 22:01:42.576996,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/06 22:31:36.174392,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 22:31:36,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 22:31:36,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:31:36.184660,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:31:36.184764,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/06 22:31:36.184781,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "null password"
[2016/04/06 22:31:36.184802,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "umask"
[2016/04/06 22:31:36.184938,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 22:32:18.281144,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 22:32:18,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 22:32:18,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:32:18.294448,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:32:18.294562,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/06 22:32:18.294584,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "null password"
[2016/04/06 22:32:18.294606,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "umask"
[2016/04/06 22:32:18.294756,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 22:39:22.000820,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/06 22:39:22,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 22:39:22,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:39:22.011855,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:39:22.011942,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/06 22:39:22.011973,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/06 22:39:22.012122,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/06 23:44:54.772899,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/07 14:18:15,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/07 14:18:15,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:18:15.166014,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:18:15.166123,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:18:15.166163,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:18:15.167070,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/07 14:18:15.203118,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/07 14:18:15.203218,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/07 14:18:45.723773,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:18:45.723881,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:18:45.723920,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:23:16.462803,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:23:16.462948,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:23:16.462994,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!


log.nmbd
[2016/04/04 15:25:15.419087,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/05 14:21:06,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 14:21:06,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 14:21:06,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 14:21:06,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 14:23:23,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 14:23:23,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 14:23:23,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 15:24:32,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/05 21:04:45,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 21:04:45,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:04:45,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:04:45,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:07:00,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:07:00,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:07:00,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:35:41,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.140
 
  *****
[2016/04/05 21:35:41,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.137
 
  *****
[2016/04/05 21:44:04,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/05 21:44:50,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 21:44:50,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:44:50,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:44:50,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:44:52,  0] ../source3/nmbd/nmbd_namequery.c:109(query_name_response)
  query_name_response: Multiple (2) responses received for a query on subnet 192.168.1.140 for name WORKGROUP<1d>.
  This response was from IP 192.168.1.133, reporting an IP address of 192.168.1.133.
[2016/04/05 21:47:05,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:47:05,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:47:05,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:50:17,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(138) ERRNO=Invalid argument
[2016/04/05 21:50:19,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(138) ERRNO=Invalid argument
[2016/04/05 21:50:21,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(138) ERRNO=Invalid argument
[2016/04/05 21:50:23,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(138) ERRNO=Invalid argument
[2016/04/05 21:50:25,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(137) ERRNO=Invalid argument
[2016/04/05 21:50:25,  0] ../source3/nmbd/nmbd_packets.c:179(send_netbios_packet)
  send_netbios_packet: send_packet() to IP 192.168.1.255 port 137 failed
[2016/04/05 21:50:25,  0] ../source3/nmbd/nmbd_nameregister.c:522(register_name)
  register_name: Failed to send packet trying to register name __MSBROWSE__<01>
[2016/04/05 21:50:25,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(138) ERRNO=Invalid argument
[2016/04/05 21:50:25,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(137) ERRNO=Invalid argument
[2016/04/05 21:50:25,  0] ../source3/nmbd/nmbd_packets.c:179(send_netbios_packet)
  send_netbios_packet: send_packet() to IP 192.168.1.255 port 137 failed
[2016/04/05 21:50:25,  0] ../source3/nmbd/nmbd_nameregister.c:522(register_name)
  register_name: Failed to send packet trying to register name __MSBROWSE__<01>
[2016/04/05 21:51:15,  0] ../source3/libsmb/nmblib.c:873(send_udp)
  Packet send failed to 192.168.1.255(138) ERRNO=Invalid argument
[2016/04/05 21:52:45,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/05 21:54:17,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/05 21:54:17,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:54:17,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:54:17,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/05 21:54:50,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.137
 
  *****
[2016/04/05 23:25:37,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/06 14:09:37,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 14:09:37,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 14:09:37,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 14:09:37,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 14:10:10,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.137
 
  *****
[2016/04/06 14:35:08,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/06 14:35:57,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 14:35:57,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 14:35:57,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 14:35:57,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 14:36:30,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.137
 
  *****
[2016/04/06 15:20:02,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/06 21:32:08,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:32:08,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:32:08,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:32:08,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:46:18,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/06 21:47:27,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:47:27,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:47:27,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:47:27,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:49:29,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:49:29,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:49:29,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:49:29,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:52:00,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 21:52:00,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:52:00,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 21:52:00,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 22:00:16,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/06 22:01:49,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/06 22:01:49,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 22:01:49,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 22:01:49,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/06 23:33:16,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.137
 
  *****
[2016/04/06 23:44:54,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/07 14:18:21,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/07 14:18:21,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:18:21,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:18:21,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/07 14:18:21,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/07 14:18:21,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/07 14:18:54,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup REDJLLJ on subnet 192.168.1.137
 
  *****


log.127.0.0.1
[2016/04/06 22:32:09.170111,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:32:09.170182,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/06 22:32:09.170198,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "null password"
[2016/04/06 22:32:09.170219,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "umask"
[2016/04/06 22:33:00.087778,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/06 22:33:00.087845,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/06 22:33:00.087861,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "null password"
[2016/04/06 22:33:00.087883,  0] ../source3/param/loadparm.c:3155(lp_do_parameter)
  Ignoring unknown parameter "umask"
[2016/04/07 14:18:23.046382,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:18:23.046605,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:18:23.046643,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:20:30.143183,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:20:30.143242,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:20:30.143263,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:22:23.318403,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:22:23.318464,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!
[2016/04/07 14:22:23.318486,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!


Gracias nuevamente, y siento si no doy los datos necesarios, me encanta gnu/linux, pero en ocasiones no se detrás de lo que ando.
samba no para de quejarse de tu configuracion:

[2016/04/07 14:23:16.462803,  0] ../source3/param/loadparm.c:3067(lp_set_enum_parm)
  WARNING: Ignoring invalid value 'share' for parameter 'security'
[2016/04/07 14:23:16.462948,  0] ../source3/param/loadparm.c:3188(lp_do_parameter)
  Global parameter security found in service section!


Empieza por revisar eso. el 'security = share' no le gusta
Si has leido mi post que te puse anteriormente, veras un warning en rojo que pone Actualizacion 2016. Basicamente lo que te pasa es lo que me paso a mi, la configuracion para samba ha cambiado, hay palabras o keywords que ya no son validas (share...). En ese warning en rojo , te envio a un comentario http://www.driverlandia.com/instalar-sa ... omment-852 donde si bajas un poco veras la configuracion que tengo yo en el samba.

Copiatela, pegala y modifica lo que necesites siempre respetando la nueva configuracion de Samba.
Zokormazo como no se lo que hago, pues agregue eso del 'security = share',y alguna cosa mas, pero antes no lo tenia, lo agregue ayer probando cosas.
sodark la verdad es que me puse a leer el post que me pusiste, y como ando algo escaso de tiempo( pues empeze como me gusta a mi, a coger cosas de aqui a de alli, hasta que empeoro mas la cosa).Voy a intentar hacer lo que me dices de usar tu configuración , haber si consigo volver a la normalidad.
Gracias nuevamente a todos los usuarios que se han prestado a echarme una mano.
jlljmansilla escribió:Zokormazo como no se lo que hago, pues agregue eso del 'security = share',y alguna cosa mas, pero antes no lo tenia, lo agregue ayer probando cosas.
sodark la verdad es que me puse a leer el post que me pusiste, y como ando algo escaso de tiempo( pues empeze como me gusta a mi, a coger cosas de aqui a de alli, hasta que empeoro mas la cosa).Voy a intentar hacer lo que me dices de usar tu configuración , haber si consigo volver a la normalidad.
Gracias nuevamente a todos los usuarios que se han prestado a echarme una mano.


En cuanto pruebes, si sigue sin funcionar pasteanos otra vez los logs y smb.conf y seguimos ayudandote (a mi al menos mencioname para enterarme que osino se me va la olla xD)
Zokormazo escribió:
jlljmansilla escribió:Zokormazo como no se lo que hago, pues agregue eso del 'security = share',y alguna cosa mas, pero antes no lo tenia, lo agregue ayer probando cosas.
sodark la verdad es que me puse a leer el post que me pusiste, y como ando algo escaso de tiempo( pues empeze como me gusta a mi, a coger cosas de aqui a de alli, hasta que empeoro mas la cosa).Voy a intentar hacer lo que me dices de usar tu configuración , haber si consigo volver a la normalidad.
Gracias nuevamente a todos los usuarios que se han prestado a echarme una mano.


En cuanto pruebes, si sigue sin funcionar pasteanos otra vez los logs y smb.conf y seguimos ayudandote (a mi al menos mencioname para enterarme que osino se me va la olla xD)

Gracias, pues sigo igual.
Estos son los log de hoy:
log.nmbd
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 14:45:31,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 14:45:56,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup REDJLLJ on subnet 192.168.1.137
 
  *****
[2016/04/08 14:46:07,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 15:01:04,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 15:05:49,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 15:05:49,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 15:05:49,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 15:16:16,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 15:23:54,  0] ../source3/nmbd/nmbd.c:57(terminate)
  Got SIGTERM: going down...
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd.c:902(main)
  nmbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:492(register_name)
  register_name: NetBIOS name JLLJMANSILLA-ALL-SERIES is too long. Truncating to
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 20:43:53,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 20:44:20,  0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
  *****
 
  Samba name server JLLJMANSILLA-ALL-SERIES is now a local master browser for workgroup REDJLLJ on subnet 192.168.1.137
 
  *****
[2016/04/08 20:44:31,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 20:59:27,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 21:04:13,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 21:04:13,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 21:04:13,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 21:14:39,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 21:24:26,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 21:24:26,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 21:24:26,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 21:29:33,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 21:44:38,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 21:44:38,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 21:44:38,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 21:44:38,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 21:59:46,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 22:04:51,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 22:04:51,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 22:04:51,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 22:14:58,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 22:25:04,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 22:25:04,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 22:25:04,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 22:29:52,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 22:44:58,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.
[2016/04/08 22:45:23,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <00> differs from question name <00>.
[2016/04/08 22:45:23,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <03> differs from question name <03>.
[2016/04/08 22:45:23,  0] ../source3/nmbd/nmbd_nameregister.c:73(register_name_response)
  register_name_response: Answer name  <20> differs from question name <20>.
[2016/04/08 23:00:10,  0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)
  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name REDJLLJ<1b> for the workgroup REDJLLJ.
  Unable to sync browse lists in this workgroup.

log.smbd
[2016/04/08 14:45:24,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/08 14:45:24.870962,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/08 14:45:24.927901,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/08 14:45:24.928006,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
[2016/04/08 15:23:54.052727,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such file or directory
[2016/04/08 20:43:45,  0] ../source3/smbd/server.c:1198(main)
  smbd version 4.1.6-Ubuntu started.
  Copyright Andrew Tridgell and the Samba Team 1992-2013
[2016/04/08 20:43:45.755044,  0] ../source3/smbd/server.c:1278(main)
  standard input is not a socket, assuming -D option
[2016/04/08 20:43:45.791762,  0] ../source3/printing/print_cups.c:151(cups_connect)
  Unable to connect to CUPS server localhost:631 - Bad file descriptor
[2016/04/08 20:43:45.791875,  0] ../source3/printing/print_cups.c:528(cups_async_callback)
  failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL


Y este es mi nuevo archivo de configuración, ya que probe con el des compañero y no me funcionó tampoco, asique en un rato que tuve volvi a probar con este pero nada.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = REDJLLJ

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Linux Mint)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
;   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
;   passdb backend = tdbsam

;   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
;   passwd program = /usr/bin/passwd %u
;   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes
   username map = /etc/samba/smbusers
   security = user
;   encrypt passwords = yes
   guest ok = yes
   guest account = anonimo

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
;   guest ok = no
;   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
;   browseable = yes
;   read only = yes
;   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

[Descargas]
   path = /home/anonimo/Descargas
   writeable = yes
        guest ok = yes
        read only = no
   browseable = yes
   writable   = yes
       
       
@jlljmansilla en ese log.smbd no se ve ningun intento de conexion de ningun cliente :S
Quita el read only = no, ya que con Writeable ese parametro queda inutil, ademas de que tienes "Writeable" (correcto) y Writable... Borra el "Writable" y "a ver" si nos fijamos mas...

P.d. de ortografia va la cosa...
@DjYXA , Sabes cuando se esta desesperado, y prueba uno poniendolo de mil maneras diferentes, lo saque de un tuto y lo ponia asi, aunque yo siempre lo escribo writeable, pero por probar.
Gracias a todos. Estoy hasta los mismísimos ya, Estoy creando un nuevo archivo de configuración y probando, pero esque ahora mismo no tengo tiempo, aunque intento sacarlo. A la noche probaré otra vez y si ya vuelvo a poner log.
@Zokormazo , seguro que tienes razón, pero esque en el móvil sigue diciendome que no hay servidor, y entrando desde el explorador de archivos, me aparece la red pero al pìnchar en ella me dice No se pudo recuperar la lista de carpetas compartidas del servidor: Conexión rehusada.
Mi solución ha sido reinstalar el SO. he puesto linux mint 17.3 kde, y funcionaba perfectamente( pero he tenido problemas con las x, resulta que al instalar los drivers privativos desde controladores adicionales, ha este se le olvida hacer el último paso "nvidia-xconfig" y no me arrancaba, además de darme problemas con virtualbox) cambie al mint mate y me encontre con el mismo problema con las x( el cual solucione configurándolo con el comando nvidia-xconfig ) y samba me sigue funcionando perfectamente. Los los que tengo ahora son igual que los últimos me que daba antes, por lo que creo que el problema estaba en mi sistema.
Gracias a todos los que me han ayudado, un saludo.
19 respuestas
Archivado
Volver a Software libre