Necesito ayuda:hace unos dias me compre este tv-monitor lcd
LCD
Type
19” TN with wide view film colour TFT active matrix, WXGA+ 1440 x 900
Display Area
41.0cm (horizontal) x 25.6cm (vertical), 48.3cm diagonal
Brightness
300cd/m² (typ.)
Contrast Ratio
500:1 (typ.)
Viewing Angle
170° horizontal, 160° vertical (at 5:1)
Response Time
5ms (off-on-off) (typ.)
Aspect Ratio
16:10
Panel Surface
Anti-glare 3H
CONNECTOR
Tuner
1 x Coax RF (PAL/SECAM)
Digital
1 x DVI (HDCP enable)
SCART¹
1 x SCART (RGB In, CVBS In/Out, Audio In/Out)
Composite-Video
1 x RCA (CVBS
S-Video
1 x 4-pin mini DIN jack
Composite Video
1 x RCA (CVBS)
PC-VGA²
1 x 15-pin mini D-sub
Audio
1 x L/R RCA set
1 x 3.5mm mini stereo jack (for PC)
Power
3-pin plug (CEE22)
AUDIO
Speakers
2 x 2.5 Watt
TELETEXT
Yes
VIDEO INPUT
PAL (B/G, H, D/K, I), SECAM (L, L', D/K), NTSC3, SDTV/EDTV (480i/p, 576i/p), HDTV (720p, 1080i)
COMPATIBILITY
PC
Compatible from 640 x 480 up to 1440 x 900, 1440 x 900 @ 60Hz preferred
Mac®
Power Mac™ up to 1440 x 900, 1440 x 900 @ 60Hz preferred
POWER
Voltage
AC 90–240V, 50/60Hz (auto switch), internal, fanless power supply
Consumption
55 watt (typ.)
CONTROLS
Basic
Power, menu, select, channel up/down, volume up/down
OSD
10% - 65% (non-condensation)
DIMENSIONS
(W x H x D mm)
443 x 381 x 203 (with base)
443 x 321 x 77 (without base)
500 x 463 x 135 (packaging)
WEIGHT
Net
5.0kg (with base)
4.9kg (without base)
Gross
6.3kg (packaging)
REGULATIONS
CE, CB, TÜV/GS, GOST, SASO, WEEE, RoHS
WALL MOUNT
VESA FDMI 100mm x 100mm, M4 screws
PACKAGE CONTENT
LCD TV, 1.8m power cable, 1.8m RF cable, SCART cable, D-sub/component RCA adpater cable,remote control, batteries, quick start guide, user guide (multi-language)
El problema es que es hd ready, pero no tiene entrada por componentes, y no se si será mejor ponerle rgb o el adaptador mas componentes , y la verdad por video compuesto, en los bordes de letras y algunos personages se ve mal, alguien me puede ayudar.
salu2
Algunas imagenes: