Ya es posible liberar el iphone

Aqui teneis un tutorial. Aunque no parece una tarea demasiado sencilla.






Thanks to Vladimir_CDI,ozbimmer, who figured this out! I Just wrote a "How to...", let's start....


U will need::

1. an iPhone
2. SIM Reader/Writer (Infinity USB Unlimited, Dynamite Programer(I used this) ,etc...)
3. SilverCard
4. Your SIM card (U must be a V1 ,U must be able to get Ki number)
5. Download - http://simemu.gsmhosting.net/SIM_EMU_6.01_CFG_v2.1.zip
- http://www.kinforce.com/down/kinforc...rsim/ws109.zip



1. ::Getting IMSI,ICCID & Ki number from your SIMs::

Step 1 - Your(V1)SIM

1. Put your carrier SIM card in programer
2. Run Woronscan
3. Click on "Tasks" tab then on "IMSI select" u will get a IMSI number, write it down.
4. Click on "Task" tab then on "ICC select" u will get a ICCID number, write it down.
5. Click on "Tasks" tab then on "Ki search", in pop-up window just click "Search", and wait,Ki extraction has began.(I was waiting for mine 40 min ) When u get it, write it down.

Step 2 - Getting IMSI from AT&T SIM card which came with an iPhone

1. Put your AT&T SIM card in programer
2. Click on "Tasks" then on "IMSI select" u will get a IMSI number, write it down.
3. Close Woronscan
4. Remove SIM from programer

Now U have all "data" to make SuperSim.


::Making SuperSim::

1. Download & extract - http://www.r*p*d*h*r*.com/files/4749..._iphone_u1.rar
1.a Put your Silvercard in programer
2. Run Sim-Emu 6.01 Configurator v2.1
3. Click on Configure tab
4. Click "Read from disk" button
5. Browse to your downloaded Flash&EEPROM files, first double click on SIM_EMU_6.01_iphone_u1.HEX and then double click on SIM_EMU_6.01_iphone_u1_EP.HEX, now they are loaded,positions 0 and 9 are red colored,thats fine.

6. In position 0 , type in data which u got from your carrier SIM with Woronscan - IMSI,Ki & ICCID!
For ADN/SMS/FDN# type 161, 15, 4, for SMS Centre type in your carrier SMS center number.

7. Now select position 9, here type only IMSI from AT&T SIM card, NOTHING ELSE!
8. In "Config mode" check "Card" circle button
9. Click on "Write to card" button,when its done close Sim-Emu 6.01 Configurator v2.1
10.Run Woronscan, click on "Security" tab then on "Disable PIN1", it will ask U PIN1 ,its 1111, click OK.
11. Close Woronscan, and remove card from programer
12. http://www.mobileshop.org/usertech/simcutting.htm


2. ::Making your iPhone SuperSim compatible::

Step 1
MAC - http://www.hacktheiphone.com/iphone_...dding_mac.html
WIN - http://www.hacktheiphone.com/iphone_...g_windows.html

Step 2
WINDOWS users - For already "fake activated" iPhones ,put the AT&T SIM that it came with iPhone in it or deactivation in step 12. will not work!In "Step 15" when U are filling in fileds ,for ICCID use your carrier SIM ICCID not AT&Ts! When u download a "custom activator v0.2" DO NOT PROCCED to Step 16! At this point remove AT&T SIM card from iPhone(still connected to computer),put in your SuperSim AND THEN procced to Step 16.!

MAC users - In step 18. type your carrier ICCID where needed



MAC - http://www.hacktheiphone.com/iphone_...intel_mac.html
WIN - http://www.hacktheiphone.com/iphone_...r_windows.html



EDIT: I changed tutorial so that u use ICCID from your carrier SIM. (Thanx ozbimmer)
EDIT: Added link to new SIM_EMU_6.01_iPhone_u1(Thanx Vladimir_CDI)