-ice- escribió:Sevilla FC escribió:Tengo el lightberry normal y he visto que ahora ha sacado el HD ( que es lo mismo solo que cambia la tira de luces )
La verdad que me gusta mas la version nueva , que las luces en plan arbol de navidad. Sabeis donde podria conseguir algo paraecido que pueda conectar a la fuente de alimentacion de lightberry normal y listo?
En Aliexpress.
Hay muchas tiras (led strip light) que puedes conseguir. Vienen en rollos de 5m y llevan 33 led (SMD 5050)/m.
Debes estar seguro de elegir aquella que lleve el integrado (IC) WS2801.
Luego, tienes que ver el tema de las esquinas. Algunos las doblan (yo nunca lo he logrado),
otros usan unos "esquineros" con contactos aunque se debe rectificar un poco el ancho de
la tira para que quepan o, finalmente, hacer las uniones soldando, que es el método más
económico, seguro y farragoso.
Fijate que hay al menos 3 modelos. Creo que los catalogan como IP20, IP62 e IP68. Se refiere al tipo
de aislación frente al agua y la humedad. De menor a mayor: sin protección (la tira al aire). Con
una cobertura en forma de mediacaña de silicona que están muy bien pero son difíciles de
limpiar para soldar y enfundadas en una vaina rectangular. Estas últimas son muy interesantes
pero, a la vez, las más caras. Particularmente yo he usado las IP20 y las he enfundado en macarrón
termocontraible transparente de 9mm. El resultado es bueno.
También debes fijarte la potencia de la fuente de alimentación (power supply) que tienes (el amperaje -A-). Cada metro
de tira consume sobre los 9.6W cuando está full white. Esto son casi 2 A en 5 V. Claro que casi nunca están en esa condición, pero hay que tenerlo en cuenta. Lo mismo, me parece que el dato es un poco exagerado.
Pero eso es lo de menos. Por unos € 10 consigues también en Aliexpress fuentes de alimentación
de 5V y 10A donde puedes enchufar todo. La RPi, los led, algún HUB para pinchar HDD que necesiten alimentarse por el USB, etc.
Y por último, necesitas mucha paciencia. Tardan bastante en llegar.
Saludos
La verdad que suena a mucho jaleo , empezare a investigarlo gracias!
Por cierto , que configuracion teneis mas o menos en el lightberry¿? hacia mucho tiempo que no tocaba nada pero me ha dado por buscar configuraciones otra vez
Asi tengo la ultima que estoy probando
// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder
{
/// Device configuration contains the following fields:
/// * 'name' : The user friendly name of the device (only used for display purposes)
/// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
/// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
/// * 'output' : The output specification depends on selected device. This can for example be the
/// device specifier, device serial number, or the output file name
/// * 'rate' : The baudrate of the output to the device
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
"device" :
{
"name" : "MyPi",
"type" : "lightberry",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"colorOrder" : "rgb"
},
/// Color manipulation configuration used to tune the output colors to specific surroundings.
/// The configuration contains a list of color-transforms. Each transform contains the
/// following fields:
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
/// tuning parameters:
/// - 'saturationGain' The gain adjustement of the saturation
/// - 'valueGain' The gain adjustement of the value
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
/// following tuning parameters for each channel:
/// - 'threshold' The minimum required input value for the channel to be on
/// (else zero)
/// - 'gamma' The gamma-curve correction factor
/// - 'blacklevel' The lowest possible value (when the channel is black)
/// - 'whitelevel' The highest possible value (when the channel is white)
///
/// Next to the list with color transforms there is also a smoothing option.
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
/// parameters:
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
/// - 'updateFrequency' The update frequency of the leds in Hz
"color" :
{
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsv" :
{
"saturationGain" : 1.5000,
"valueGain" : 2.0000
},
"red" :
{
"threshold" : 0.2000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"green" :
{
"threshold" : 0.2000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
},
"blue" :
{
"threshold" : 0.2000,
"gamma" : 1.0000,
"blacklevel" : 0.0000,
"whitelevel" : 1.0000
}
}
],
"smoothing" :
{
"type" : "linear",
"time_ms" : 150,
"updateFrequency" : 30.0000
}
},
/// The configuration for each individual led. This contains the specification of the area
/// averaged of an input image for each led to determine its color. Each item in the list
/// contains the following fields:
/// * index: The index of the led. This determines its location in the string of leds; zero
/// being the first led.
/// * hscan: The fractional part of the image along the horizontal used for the averaging
/// (minimum and maximum inclusive)
/// * vscan: The fractional part of the image along the vertical used for the averaging
/// (minimum and maximum inclusive)
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0600 },
"vscan" : { "minimum" : 0.8325, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0600 },
"vscan" : { "minimum" : 0.6658, "maximum" : 0.8342 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0600 },
"vscan" : { "minimum" : 0.4992, "maximum" : 0.6675 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0600 },
"vscan" : { "minimum" : 0.3325, "maximum" : 0.5008 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0600 },
"vscan" : { "minimum" : 0.1658, "maximum" : 0.3342 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0600 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1675 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.1117 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.1106, "maximum" : 0.2228 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.2217, "maximum" : 0.3339 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.3328, "maximum" : 0.4450 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.4439, "maximum" : 0.5561 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.5550, "maximum" : 0.6672 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.6661, "maximum" : 0.7783 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.7772, "maximum" : 0.8894 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.8883, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.9400, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.1675 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.9400, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1658, "maximum" : 0.3342 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.9400, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3325, "maximum" : 0.5008 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.9400, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4992, "maximum" : 0.6675 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.9400, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6658, "maximum" : 0.8342 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.9400, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8325, "maximum" : 1.0000 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.8883, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.7772, "maximum" : 0.8894 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.6661, "maximum" : 0.7783 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.5550, "maximum" : 0.6672 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.4439, "maximum" : 0.5561 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.3328, "maximum" : 0.4450 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.2217, "maximum" : 0.3339 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.1106, "maximum" : 0.2228 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.1117 },
"vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 }
}
],
/// The black border configuration, contains the following items:
/// * enable : true if the detector should be activated
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.01
},
/// The configuration of the effect engine, contains the following items:
/// * paths : An array with absolute location(s) of directories with effects
/// * bootsequence : The effect selected as 'boot sequence'
"effects" :
{
"paths" :
[
"/opt/hyperion/effects"
]
},
"bootsequence" :
{
"effect" : "Rainbow swirl fast",
"duration_ms" : 5000
},
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0
},
/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the XBMC-host
/// * xbmcTcpPort : The TCP-port of the XBMC-server
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
/// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
"xbmcVideoChecker" :
{
"xbmcAddress" : "127.0.0.1",
"xbmcTcpPort" : 9090,
"grabVideo" : true,
"grabPictures" : true,
"grabAudio" : true,
"grabMenu" : false,
"grabScreensaver" : true,
"enable3DDetection" : true
},
/// Configuration for the embedded V4L2 grabber
/// * device : V4L2 Device to use [default="/dev/video0"]
/// * input : V4L2 input to use [default=0]
/// * standard : Video standard (no-change/PAL/NTSC) [default="no-change"]
/// * width : V4L2 width to set [default=-1]
/// * height : V4L2 height to set [default=-1]
/// * frameDecimation : Frame decimation factor [default=2]
/// * sizeDecimation : Size decimation factor [default=8]
/// * priority : Hyperion priority channel [default=800]
/// * mode : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]
/// * cropLeft : Cropping from the left [default=0]
/// * cropRight : Cropping from the right [default=0]
/// * cropTop : Cropping from the top [default=0]
/// * cropBottom : Cropping from the bottom [default=0]
/// * redSignalThreshold : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0]
/// * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0]
/// * blueSignalThreshold : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0]
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "no-change",
"width" : 1,
"height" : 1,
"frameDecimation" : 2,
"sizeDecimation" : 4,
"priority" : 800,
"mode" : "2D",
"cropLeft" : 5,
"cropRight" : 5,
"cropTop" : 15,
"cropBottom" : 15,
"redSignalThreshold" : 0.2,
"greenSignalThreshold" : 0.2,
"blueSignalThreshold" : 0.2
},
/// The configuration of the Json server which enables the json remote interface
/// * port : Port at which the json server is started
"jsonServer" :
{
"port" : 19444
},
/// The configuration of the Proto server which enables the protobuffer remote interface
/// * port : Port at which the protobuffer server is started
"protoServer" :
{
"port" : 19445
},
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
// "boblightServer" :
// {
// "port" : 19333
// },
"endOfJson" : "endOfJson"
}
![[+risas]](/images/smilies/nuevos/risa_ani3.gif "más risas")
![[sonrisa]](/images/smilies/nuevos/risa_ani1.gif "sonrisa")
y tranquilo que aqui estamos para ayudar.
![[oki]](/images/smilies/net_thumbsup.gif "Ok!")
![[tadoramo]](/images/smilies/adora.gif "Adorando")
increible lo simple que fue montarlo, ahora quisiera saber los que habeis pillado el kit de salida de euroconector en que tienda hay stock ya que en donde compre lightberry no ponen fecha de reposicionn de stock.. gracias 
![[360º]](/images/smilies/nuevos/vueltas.gif "como la niña del exorcista")
![[amor]](/images/smilies/nuevos/enamorado.gif "enamorado")
ya os enseñare el resultado ![[bye]](/images/smilies/nuevos2/adio.gif "adios")
(o ninguno si no llevaba drivers) 
![[plas]](/images/smilies/aplauso.gif "Aplausos")
