[vie mar 24 01:35:18 2017] ata3: lost interrupt (Status 0x50)
[vie mar 24 01:35:18 2017] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[vie mar 24 01:35:18 2017] ata3.00: failed command: READ DMA
[vie mar 24 01:35:18 2017] ata3.00: cmd c8/00:e0:18:49:04/00:00:00:00:00/e0 tag 0 dma 114688 in
res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
[vie mar 24 01:35:18 2017] ata3.00: status: { DRDY }
[vie mar 24 01:35:18 2017] ata3: soft resetting link
[vie mar 24 01:35:19 2017] ata3.00: configured for UDMA/33
[vie mar 24 01:35:19 2017] ata3: EH complete...
CPU0 CPU1 CPU2 CPU3
0: 45 1 0 0 IO-APIC 2-edge timer
1: 1 0 1 0 IO-APIC 1-edge i8042
8: 0 0 0 1 IO-APIC 8-edge rtc0
9: 0 0 0 0 IO-APIC 9-fasteoi acpi
12: 0 2 2 0 IO-APIC 12-edge i8042
14: 59 165190 151125 266013 IO-APIC 14-edge ata_piix
15: 0 0 0 0 IO-APIC 15-edge ata_piix
16: 72 226254 26008 4462 IO-APIC 16-fasteoi uhci_hcd:usb5
18: 0 0 0 0 IO-APIC 18-fasteoi uhci_hcd:usb4
19: 3359 59053 393856 103174 IO-APIC 19-fasteoi ata_piix, uhci_hcd:usb3
22: 98 22289 3081348 131998 IO-APIC 22-fasteoi ath
23: 1097 5373333 4982 4784 IO-APIC 23-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
...ordenador@ordenador-desktop:~$ sudo smartctl --all /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-41-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1SB102
Serial Number: Z9A701CP
LU WWN Device Id: 5 000c50 092c2de4e
Firmware Version: CC43
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Mar 24 13:17:27 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 101) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 079 063 006 Pre-fail Always - 89207356
3 Spin_Up_Time 0x0003 099 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 242
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 065 060 045 Pre-fail Always - 3407707
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 358
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 524
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 2
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 080 064 040 Old_age Always - 20 (Min/Max 17/20)
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 524
194 Temperature_Celsius 0x0022 020 016 000 Old_age Always - 20 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 004 001 000 Old_age Always - 89207356
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 345h+33m+44.484s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 579534890
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 738534329
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 00% 25 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.